2004 H2 Hummer on 2040-cars

Auto blog

GMC could have used Jeep's prized grille design on its born-again Hummer

General Motors confirmed it's bringing the Hummer nameplate back on an electric, GMC-badged pickup by publishing a dark photo of its front end. The battery-powered drivetrain under the sheetmetal represents a tectonic shift, but we noticed another flagrant break with tradition: it wears six slot-like inserts instead of seven like on every previous Hummer and countless Jeeps. Adding an extra slot wouldn't have landed GMC in hot water. The seven-slot grille has historically been associated with Jeep, and the company proved it's willing to go to significant lengths to ensure another automaker — especially one it perceives as a rival — doesn't use it. Parent company Fiat-Chrysler Automobiles (FCA) bitterly sued Mahindra over the Roxor's design, including its five-slot grille, and won in 2019, forcing the Indian firm to unveil a redesigned side-by-side for the 2020 model year. And yet, stylists would have very likely been able to get away with it on the Hummer. While General Motors owns Hummer, the brand traces its ancestry to 1970, when American Motors Corporation (AMC) purchased Jeep from Kaiser and changed the name of its General Products Division to AM General Corp. The division manufactured the rear-wheel drive, CJ-based DJ for the United States Postal Service and began developing the Humvee in 1979. Jeep and AM General went their separate ways when Renault began investing in AMC. Foreign companies weren't allowed to own defense contractors, and AMC had more to gain by gradually selling out to Renault than by keeping AM General, so it divested the division to LTV Corporation in 1983. Humvee production started shortly after, but no one protested its seven-slot grille because there was no risk of it stealing sales from a comparable Jeep model. It was manufactured exclusively for the U.S. Army, and civilian sales weren't planned. H2SUV View 4 Photos The original civilian Hummer released in 1992 must have raised more than a few eyebrows but, here again, it didn't directly compete with one of Jeep's off-roaders, so no one complained. It was huge, correspondingly expensive, and its portal axles made the YJ-generation Wrangler wet its pants. It's the H2 concept (pictured above) unveiled at the 2000 Detroit Auto Show that set off alarm bells in Auburn Hills. DaimlerChrysler's lawyers counted the slots in the chrome-plated insert that dominated its front end and shuddered when they reached seven.

Mil-Spec 003 First Drive Review | The ultimate Hummer H1

We're in something of a golden age for automotive restomodding, and into a heady mix that includes Singer's reimagined 911s, Icon's fancy off-roaders, and lots of updated Land Rovers. The latest company with ambitions to become a top-tier custom car brand is Mil-Spec, which aims to do what the aforementioned companies do, but with the big, brash, blunt Hummer H1. And in particular, the company is aiming to make its Hummers a compelling alternative to a used Hummer H1 Alpha. The Alpha is generally considered to be the best of the breed with the most powerful diesel engine offered, larger brakes, and a nicer interior compared with its predecessors. To find out whether the company's early efforts live up to that ambition, Mil-Spec invited us to drive their third completed vehicle, Mil-Spec 003. It started life as a 1995 Hummer H1, and as with all of Mil-Spec's vehicles, it was completely disassembled, and the body and frame media-blasted down to metal. The frame and related components are then powder-coated with a black gloss finish. The truck's aluminum body, in this case a four-door hardtop pickup variant, but is coated in a resilient bedliner-like material designed for easy care. Bits of Kevlar are mixed in with the material for strength, and it can be tinted different colors and have rougher or finer textures. Underneath the body, one of the five different engines that were available on the H1, usually a diesel V8, is replaced with a 6.6-liter Duramax LBZ turbodiesel V8. This engine was available on heavy duty Chevy and GMC pickup trucks, and a related engine was used in the Hummer H1 Alpha. Whereas the engine in the H1 Alpha made 300 horsepower and 520 pound-feet of torque mated to a 5-speed automatic, the Mil-Spec's LBZ has had turbo upgrades and a different ECU tune allowing it to produce 500 horsepower and 1,000 pound-feet of torque. It's also coupled to an Allison 1000 6-speed automatic transmission. The mechanical upgrades don't stop with the engine and transmission. The inboard brakes are given drilled and vented discs, and an ARB Air Locker locking rear differential fitted. Dual auxiliary transmission coolers also make an appearance and can be switched on as needed. The 003 received 20-inch wheels with 38-inch mud terrain tires, but larger tires can be added if desired.

GM Design shows another early Hummer EV sketch

Like a new mother who's still so excited about her one-year-old baby that she can't stop showing ultrasound photos, General Motors is so excited about its biggest new baby, the battery-electric GMC Hummer, that it can't stop showing off development design sketches. The off-road monster with the 200-kWh Ultium battery pack debuted online on October 21 last year. The next day, the GM Design Instagram page posted some of the Hummer's early "theme sketches" leading to the production version. These had a conceptual flair to them, but were rather restrained. A month later, GM uncovered a series of development renderings showing off a much wilder truck bursting with more angles than a geometry text book. The archives have opened up again with a new "ideation sketch," this one between the first believable sketches and the second truck that Master Chief and Doomguy share on their days off.  All three sets of drawings show similar three-box proportions, it's the details that got a ton of love. On this newest sketch, the fenders flare a touch more than on the production truck, but the wheel wells are cut with the kind of clearance found on a Baja 1000 Trophy Truck. Out back, save for the tow hooks, the rear end is totally different than production. The sketch puts illuminated Hummer script across a narrow tailgate flanked by small square, taillights housing six individual elements. Beneath that, a bumper-less rear end puts nothing more than a sloped bash pate between the truck and the rocks it's just scrambled over. To our eyes, this is the best blend of production-ready comfort from the first sketches and zoot suit angles from the second that we've seen so far.  First deliveries of the GMC Hummer EV Edition 1 are expected before the year is out. When we get a chance to absorb the truck in its native habitats, we'll know whether there's cause for disappointment at what could have been. If so, with all this hunger among the monied for something different, we feel like restomodders have been given the perfect head starts on custom rebodied Hummers that would make things right. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.