2014 Honda Ridgeline Se on 2040-cars

Auto blog

McLaren working on P15 supercar to slot between 650S and P1

McLaren has been busy these past few years. It launched the MP4-12C in 2011, the 12C Spider in 2012, the P1 in 2013 and (most recently) the 650S in 2014. But it's not about to stop there. It's got an "entry-level" model in the works, set to take on the Porsche 911, and - according to information reported by Car and Driver and confirmed by McLaren in correspondence with Autoblog - a new flagship model, too.
The project is internally codenamed P15, and it calls for a new flagship that will cap the company's lineup once the P1 finishes its limited production run, but carry a price tag in the neighborhood of $500k to slot in between the P1 and the new 650S.
Just how, you wonder, can McLaren possibly develop another supercar each year? Simple: underneath, they're all essentially the same. (Only we're sure it's anything but simple.) That is to say they're all based on the same carbon monocoque structure and powered by the same 3.8-liter twin-turbo V8 mated to a seven-speed dual-clutch transmission driving the rear wheels. What differentiates them is what the engineers in Woking build around that monocoque and how they tune the engine: +/- 600 horsepower in the 12C (depending on the year it was built), 640 hp in the 650S, or 727 hp in the P1 (with another 177 from the electric assist). The 911 fighter would likely develop in the 500hp range, and the P15 will probably land in the upper 600 (or lower 700) range.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Honda reveals three new turbo VTEC engines, including Civic Type R 2.0L

It's fair to say that in recent years, Honda has been viewed as a laggard when it comes to engine and gearbox development, seemingly missing the boat on direct-injection, forced-induction and high gear-count transmissions, among other things. But under its Earth Dreams banner, the Japanese automaker is showing new vigor, with the latest proof being this trio of just-announced powerplants.
Measuring 1.0-liters, 1.5-liters and 2.0-liters in displacement, this array of three- and four-cylinder engines boasts turbocharging and direct-injection along with the latest iteration of Honda's famed VTEC variable valve timing hardware. "Most suitable for small-to-medium-sized vehicles," the largest engine is said to be good for more than 276 horsepower and will slot into the eagerly awaited Civic Type R, iconic red valve cover and all.
Unfortunately, few other details about the hot Civic's engine or any of the others are being made public at this time, and there's no official word about the engines coming to North American in the Type R or any other model. Given that all the engines are complaint with stringent Euro 6 emissions standards, they figure to be clean enough, and Honda says that these have been developed as global powerplants, so we'd be shocked if they didn't come ashore in new or updated products over the next few years... even if they leave the CTR on the boat.