2014 Honda Pilot Ex-l on 2040-cars

Auto blog

Why Acura should build a hybrid Integra successor using NSX tech

Yes, it sounds like a heresy. Yes, the Honda CR-Z was not a good hybrid sports car. Yes, we know the RSX officially replaced the Integra here (but was called the Integra in Japan). But, no, we're not crazy. Well, maybe a little bit. But hear us out. At the moment Acura is a bit of an unfocused mess. Its line-up is thoroughly uninspiring, save for its $200,000 NSX supercar – a great mid-engined supercar with an impressive, performance-oriented hybrid AWD system. And yet few people would draw a line connecting Acura's other SH-AWD hybrids, the RLX Sport Hybrid and MDX Sport Hybrid, to the NSX. The first NSX told the world that Acura built cars with world-class technology and performance, and the Integra carried it to people with normal pocketbooks. Since the new NSX communicates a similar message as its forbearer, so too would a new Integra. Now making an entry-level sports car with hybrid technology is tricky business. As we already established, the Honda CR-Z was a colossal flop. It's balance was all off: heavy, expensive, and not very sporty – and it didn't even get very good fuel economy. However, Honda and Acura can learn from these mistakes. First, to keep costs in check, Acura can borrow from Honda's ever-improving parts bin. It would logical to borrow the excellent Civic coupe platform – something the old Integra did as well. It could also attach the proposed hybrid powertrain to the upcoming Si turbocharged four-cylinder. Some added cost will be unavoidable, since the batteries and motors will have to go somewhere. That will cost some engineering dollars, and inflate the price tag a bit. However, since Acura is a premium brand, it has some wiggle room to bump up the price without losing buyers. Weight is another potential issue this hypothetical hybrid will face, and was one of the chief complaints with the CR-Z. Looking at the RLX and the RLX Sport Hybrid, the hybrid bits weigh about an extra 340 pounds. That's not insignificant, but added to the turbocharged Civic EX-T coupe's 2,900 pound curb weight, you would have a car that would weigh 3,240 pounds. That's comparable to the very fun Mustang EcoBoost. As long as Acura keeps the weight under 3,500 pounds, the brand should have an entertaining coupe on its hands. The final piece of the puzzle is to make sure it isn't compromised. Every bit of hybrid tech in the NSX is there for performance. It helps eliminate turbo lag, and it improves acceleration and handling.

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.

Fire up your 3D printer! Honda releases data for several of its past concepts [w/video]

Futurists have been treating 3D printing like it is the second coming of the Industrial Revolution for years. Everyone will have a 3D printer in their garage and be able make practically anything at home before you know it, right? Well... not quite.
While we can imagine a piece of trim breaking on our car and being able to download the file to print a new one at home, the reality is that 3D printing is still in its earliest stages as a consumer device. Still, Honda is capitalizing on the technology by allowing people to make models of its concept cars at home.
The Honda 3D Design Archive currently consists of five models based on the Fuya-Jo, FSR, Kiwami, Puyo, and NSX concepts. The printer files can be downloaded from the web and carry Creative Commons 4.0 licenses, which allow them to be freely shared. Honda promises that more files will be added to the archive soon.