2006 Honda Pilot Ex Sport Utility 4-door 3.5l on 2040-cars

Auto blog

Honda insiders push for Acura NSX Type R sans hybrid tech

With 500 horsepower on tap from a sophisticated hybrid powertrain, there's plenty to love about the new Acura NSX. If the more performance-oriented elements within the Japanese automaker get their way, it could get even better. Speaking with one of the NSX project's chief engineers Nick Robinson at the launch of the new supercar, Autocar reports that there's an effort underway to develop an NSX Type R. Following a much-loved formula, the more extreme variant would pack even more power than the existing version, unburdened by excess weight. A big part of the targeted weight savings would come from ditching some of the heavier components from the hybrid system. The electric motor at the rear could stay to serve as alternator, starter motor, and flywheel. But the electric motors at the front would go, helping to shed a few hundred pounds. Throw in some lightweight materials and we'd be looking at a considerable weight reduction. It could even integrate some active aerodynamic elements that were excluded from the NSX on the road to production. Though the project may still be a ways off from getting the green light, but Robinson and some of his colleagues are working on prototypes ostensibly to make the case. He and his brother James (a powertrain engineer at Honda) will be driving a pair of NSXs at Pikes Peak this year – one that's as close to showroom stock as the regulations will allow, but the other will be closer to what they have in mind for a Type R. It'll ditch the hybrid system and put an electric compressor in its place to eliminate any turbo lag and produce even more power than the existing model. Now if they can only get the go-ahead from the higher-ups at Honda. Related Video: Featured Gallery 2014 Honda NSX Concept-GT News Source: Autocar Green Acura Honda Coupe Hybrid Performance Supercars honda nsx acura nsx type r

Takata airbag recalls add another 5 million vehicles

The Takata airbag inflator recall expanded by about 6.5 million vehicles recently when Toyota and Nissan announced global expansions to replace the faulty parts. You can add another 5 million more as Honda and Daihatsu also broaden their replacement campaigns. Although in this latest case, none of the affected models are in the United States or Canada. Honda is recalling 4.89 million more vehicles globally, and Daihatsu has about 260,000 to repair in Japan, according to Automotive News. With these latest expansions, all of the affected automakers have needed to fix about 36 million vehicles globally for these faulty airbags since 2008. Some of the first instances of these problems were found in an Isuzu campaign in 2001. This latest round of recalls was sparked by a study from Takata that found the inflators' propellant could be affected by moisture over time. While the automakers received this information in March, it took time to determine the number of vehicles in need of repair and where they were located, according to Automotive News. To make sure all of the affected vehicles in the US are repaired in a timely fashion, the National Highway Traffic Safety Administration is reportedly considering a strategy to force things to speed up. Honda and Toyota are already using outside suppliers for the parts they need. Related Video: News Source: Automotive News - sub. req.Image Credit: Shizuo Kambayashi / AP Photo Recalls Honda Daihatsu Safety Takata airbag recall

2015 Honda Fit production gets underway in Mexico

After two years of construction, Honda's new factory in Celaya, Mexico, has officially begun production of the all-new 2015 Fit in North America. Mexican President Enrique Pena Nieto and Honda President and CEO Takanobu Ito both attended the opening and watched the first Fit roll off the line at the $800-million plant. Later this year, Honda will add production of its new Vezel small crossover to the new facility, though the latter is expected to be marketed in North America under a new name.
The Celaya factory will specialize in building subcompact cars by employing cutting-edge tech to use less material and less energy during production. Honda is still constructing a $470-million transmission plant on the campus to build continuously variable transmissions in the second half of 2015. When it's finished, it is expected to have an annual capacity of 200,000 vehicles and employ 3,200 people.
With the facility's completion, Honda now has a 1.92-million unit annual production capacity in North America, and it claims that when Celaya reaches full production, 95-percent of vehicles sold in the US will be built in North America. The new Fit has already proven quite popular in Japan, and now we will have to wait and see if North American buyers embrace it as well. The first new Fit customer cars will hit the roads later this spring, and as Honda spokesman Steve Kinkade tells Autoblog, all Fit models sold in North American will be built at the plant. Scroll down to read the full press release about the Fit and its new Mexican home.