2003 Honda Pilot Ex-l Rear Dvd, Leather, Awd, Perfect. Low Reserve Wow!!! on 2040-cars

Auto blog

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.

Honda speeds down memory lane with its first F1 car

Though most Formula One teams are based in the UK, they hail from places all around the world. There are teams from Russia, India and Malaysia, but in the 1960s, the idea of an F1 team coming from as far away as Japan was unthinkable in what was a predominantly European racing series. That's just the notion that Honda aimed to upset when it entered the car you see here in the 1964 Formula One World Championship.
With a 1.5-liter V12 dispensing 220 horsepower through a six-speed manual (its shifter necessitating the steering wheel mounted left-of-center), the 1964 Honda RA271 was built around an aluminum monocoque in a package that looks like a Formula Vee car you could erect in your garage, but it state-of-the-art when it was built. Speaking of which, Honda only built one, and today it's part of the Honda Collection Hall at Motegi, but the priceless racer made the trip down to Japan's capital so we could check it out at the Tokyo Motor Show. Awfully nice of Honda, we'd say. Check it out in our gallery of live shots from the show floor above.