2021 Honda Hr-v Awd Sport on 2040-cars

Auto blog

Honda tags Civic, Accord, HR-V, Fit and more in fuel pump recall

American Honda Motor Company's recent issues with fuel pumps continue, as a new recall affects a large number of Honda and Acura vehicles from the 2018-2020 model years. The recall covers a total of 136,057 vehicles, including select 2018-2019 Acura NSX, 2019 Acura RDX, RLX, and RLX Sport Hybrid models, as well as 2018-2019 Honda Accords, Civic Hatchbacks, Civic Type Rs, HR-Vs, 2019-2020 Insights, and 2019 Fits.  National Highway Traffic Safety Administration campaign No. 20V314000, published May 28, 2020, states that the low-pressure fuel pump inside the fuel tanks of the aforementioned vehicles could falter or completely fail. Should the low-pressure fuel pump fail, the car could stall, regardless of its state of motion. Recall documents reveal fuel pump might fail due to swelling of the fuel pump motor impeller, which would cause the pump to seize. This issue is the result of a problem with how the parts were manufactured. These "lower density impellers" were "exposed to production solvent drying for longer periods of time." This caused some impellers to have surface cracking, which resulted in "excessive fuel absorption," which warps the impellers. Here's a breakdown of how many vehicles of each type were potentially affected:  2018-2019 Acura NSX: 146 2019 Acura RDX: 34,405 2019 RLX: 124 2019 RLX Sport Hybrid: 206 2018-2019 Honda Accord: 11,227 2018-2019 Civic Hatchback: 24,235 2018-2019 Civic Type R: 1,785 2018-2019 HR-V: 39,676 2019-2020 Insight: 14,959 2019 Fit: 9,294 Honda will notify owners to schedule an appointment with local dealerships. The fuel pump assembly on all affected vehicles will be replaced for free. For more information, visit NHTSA. Related Video:

Alonso wants an NSX, but did Honda block him from Le Mans?

One of the biggest changes in store for the 2015 Formula One World Championship will see Fernando Alonso moving back to McLaren. That means he'll be driving under Honda power for the first time, after spending the bulk of his career driving for Renault and Ferrari. And being Honda's new poster child, as the two-time World Champion is fast discovering, has its advantages and its drawbacks. According to the latest reports, Alonso had been negotiating a clause in his contract with McLaren that could have seen him driving a Porsche 919 Hybrid at Le Mans this year, but Honda reportedly stepped in at the last minute and scuttled the plan. The drive would have been Alonso's first in the famous 24-hour race, after having had the honor of waving the flag at La Sarthe last summer. In one of the wilder rumors that emerged during the prolonged silence over his move for this season, the Spaniard was also linked to a potential return for Ferrari to Le Mans. That prospect came to naught, and now the Porsche deal has been wheeled into the garage, as well. The upcoming F1 season is expected to be one of transition, adjustment and development for McLaren and Honda, but the Japanese automaker's involvement in his hiring may not be all bad news for Alonso. Following the reveal of the new Acura NSX, Alonso tweeted "You still don't know, but one day we will be together..." followed by a series of heart-eyed smiley-face emoticons and accompanies by images of Honda's new supercar. The implication is that the two-time World Champion is expecting to get his talented hands on an NSX of his own, and we can certainly see how Honda would appreciate the imagery of Fernando driving around in its flagship. Even if it doesn't, though, we're sure McLaren would be glad to hook him up with a company car of its own – though Lewis Hamilton encountered some trouble securing (a very specific) one for himself. Even discounting the front-running F1 machinery he's been tasked with piloting on track to an impressive 32 career wins, Alonso has had some lustworthy company cars at his disposal over the years. At Renault, he had a Megane RS to drive, and during his last stint at McLaren, he had an SLR 722. But since signing with Ferrari, he's been given the keys to FCA models as varied as a Ferrari FF, a special 599 GTO, a Maserati GranCabrio, a Jeep Grand Cherokee SRT and an Abarth 695... and those are just the ones we know about.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.