Sport Manual 1.5l 16 Alloy Wheels P185/55hr16 All-season Tires Fog Lights on 2040-cars

Auto blog

2016 Honda Pilot First Drive [w/video]

For all it had going for it, the second-generation Honda Pilot was stung by one undeniable fact: it looked like a big, boxy SUV at a time when consumer favor was shifting towards car-based crossovers. For 2016, though, Honda is offering a third-generation Pilot that not only does away with the old model's brutalist looks, but also adopts bleeding-edge safety technology and fuel-efficient powertrains. The Pilot's new styling still doesn't really work, to our eyes. That's not because of the CR-V-inspired headlights or Accord-derived grille. It's not even because of the horizontally oriented, reshaped taillights. The biggest problem with the Pilot is its profile. The hood is an inch lower for 2016, and the CUV is 3.5 inches longer than its predecessor with an extra inch ahead of the front axle. Simply put, the proportions are out of whack. The hood is too short, the passenger compartment too large, and the beltline too low. It's little wonder then that both Autoblog staffers and readers have pointed out the 2016 Pilot's minivan-like resemblance. Changes underneath the Pilot's sheetmetal are just as drastic. Honda incorporated a mix of high-strength steel, aluminum, and even magnesium to create the CUV's new bones. Taken as a whole, our top-of-the-line Elite tester is 286 pounds lighter than the previous model, while being 25 percent more rigid overall. Aside from some penny pinching in the cabin – the hard plastic on the top of the rear door panels is particularly egregious – the Pilot's interior is home to soft-touch plastics, quality leather, and handsome piano black accents. Front passengers are treated to broad, comfortable, power seats, complete with heating and ventilation (depending on trim). What they lack in outright support through the turns, they make up for in long-haul comfort. Honda will continue to sell the Pilot with seating for eight, but for the very first time, it's also offering a pair of captain's chairs in place of the second-row bench. Either setup is comfortable, though the seven-passenger layout allows easier access to the third row. As for the way-back, it can accommodate two kids or two adults in a pinch, but we aren't sure how Honda thinks three humans of any size will fit back there. Happily, Honda ditched the two-screen center stack setup found elsewhere in its model range. The Pilot's ample eight-inch display (standard on the Touring and Elite trims) has menus that are easy to manage.

James Glickenhaus' SCG 003 undisguised in street and track form

For James Glickenhaus buying a factory-made supercar isn't good enough; he wants to develop his own. Following up on the Ferrari Enzo-based P4/5 and later the P4/5 Competition, Glickenhaus' latest project is appropriately called the 003, and he's finally displaying it in road trim. These first undisguised photos of the SCG 003S show off a supercar with a front end reminiscent of a Ferrari Enzo. However, the rear evokes the look of a modern endurance racer with a fin running along the spine. A wing at the back connects it all together, and the massive diffuser should keep things planted too. Development of the 003 has been going for over a year by Scuderia Cameron Glickenhaus, but the company has set quite a challenge for itself to get just right. Glickenhaus wants his latest project to be a true racecar for the street. That idea gets thrown around a lot, but it might be true in this case. In motorsports trim, the SCG 003C (pictured inset) packs a mid-mounted Honda Performance Development twin-turbocharged V6, but the engine sits in a detachable rear subframe. When the time comes for the road, the car converts to the SCG 003S and allegedly swaps in a twin-turbo W12. It makes the vehicle the best of both worlds – at least in theory. SCG reportedly plans to show the 003 at the Geneva Motor Show, so we should get a better look then. Glickenhaus also wants to take the car racing in the 24-hour events at the Nurburgring and Spa later this year.

Honda builds 300-millionth motorcycle, it's a Gold Wing

Honda has been selling motorcycles in Japan since 1949. And it's been selling bikes to US customers since John Travolta had a paper route. Combine all those years, huge markets and great products, and apparently the number you come up with is 300,000,000. Wowza. Starting with the iconic 98-cc Dream Type-D you see above, Honda announced that it has built its 300-millionth motorcycle this month. The company currently sells all manner of powersports goodness, of course – ATVs, side-by-sides and two-wheelers – at 32 facilities in 22 countries. Honda motorcycles took our country by storm in the 1960s, taking the title as the best-selling bike brand in the world during that decade, largely on the back of the Honda 50 or "Super Cub" bike. Honda's success in the '60s also helped to justify the establishment its first manufacturing footprint in North America, in Marysville, OH in 1979. The company mentions, in the press release you'll find below, that lucky number 300 million was a Gold Wing produced at the Kumamoto factory in Japan. We're celebrating that tidbit with a heaping helping of historic Gold Wing photography, in the gallery of Honda bikes, above. Honda Marks Unprecedented Milestone: Global Production of 300 Million Motorcycles Nov 24, 2014 - TORRANCE, Calif. Achieving a milestone more than 65 years in the making, Honda Motor Co., Ltd. today announced production of its 300-millionth motorcycle. The milestone bike is a Honda Gold Wing produced at the company's Kumamoto Factory in Japan. Honda will celebrate the 40th anniversary of the iconic Gold Wing in 2015. Honda began mass production of motorcycles in Japan in 1949 when it built the Honda 98cc Dream Type-D. Today, Honda produces motorcycles, ATV's and side-by-sides at 32 plants in 22 countries, including two plants in North America. "This incredible milestone is the result of the millions of customers who have placed their trust in Honda and we would like to thank all of our customers, associates, dealers and community partners in North America for helping make it possible," said Bob Gurga, Vice President and Manager of Motorcycle Division for American Honda. "Now, we are focused on the future and the ways that we can harness the challenging spirit of Honda associates to create new joy for Honda customers." In 1958, Honda introduced the Honda 50, known globally as the Super Cub, which would go on to revolutionize the industry. This iconic bike paved the way for Honda's expansion into the U.S.