2004 Orange Ex! on 2040-cars

Auto blog

Honda Expands Takata Airbag Recall To 5.4M Units In The US

While Honda already announced plans to take its front driver's side Takata airbag inflator recall nationwide, the automaker has now officially reported on the number of affected vehicles and the specific models in need of repair. The expanded campaign covers an estimated 5.4 million units across the US, including those already being fixed under the previous regional actions. That number is an expansion of the five million units initially reported by NHTSA. The affected models under the nationwide recall are the 2001-2007 Accord with a four-cylinder engine, 2001-2002 Accord V6, 2001-2005 Civic, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2007 Pilot, 2006 Ridegline, 2003-2006 Acura MDX, 2002-2003 TL and 2002 CL. For customers who expressed concern about their vehicle's safety, Honda had already been replacing the inflators nationwide. It's possible for the inflators in these vehicles to rupture when inflating the airbag, spraying metal fragments at occupants. This problem has been blamed for at least five deaths worldwide and at least 139 reported injuries. In its statement, Honda said that it worked with Takata to test the recalled inflators in the original high-humidity recall regions, and there were no abnormal deployments in these evaluations. Honda will begin notifying owners by "over time," according to its statement. Priority will be put on the geographic areas with the highest risk of ruptures. Those in the original recall region were contacted in September. Earlier in December, Honda partnered with Autoliv to supply the automaker with replacement inflators for this campaign. Autoliv predicted it would take six months for deliveries to start. Takata also increased its production of substitute components. Scroll down to read the company's announcement of this nationwide expansion. Statement by American Honda Regarding National Safety Improvement Campaign: Driver's Front Airbag Inflator Supplied by Takata Dec 8, 2014 - TORRANCE, Calif. Honda will voluntarily expand a regional Safety Improvement Campaign initiated in June 2014 (NHTSA No. 14V-351) into a national Safety Improvement Campaign affecting certain 2001 through 2011 Honda and Acura vehicles in the United States to replace the driver frontal airbag inflator, free of charge. Honda is expanding this Safety Improvement Campaign to address concerns raised by its customers whose vehicles were not included in the regional campaign.

Formula 1 seeking independent engine supplier

Formula 1 could get a new engine supplier in the near future, if Bernie Ecclestone and the independent teams gets their way. According to Autosport, the FIA is soon to open the contract up for bids, and there are already several manufacturers that have expressed interest. Currently Mercedes, Ferrari, Renault, and Honda supply engines – both to their own premier teams (Red Bull and McLaren for the latter two) but also to other teams like Williams, Sauber, and Toro Rosso. Because the new turbocharged V6 hybrid power units cost those four suppliers so much to develop, they're charging their customer teams big bucks – around $20-30 million per season – to provide the engines. These costs are much higher than the $10 million or so it used to cost to purchase a V8 engine under the previous regulations. Ecclestone figures it's time to bring in another supplier who will not run their own team and not play favorites, but will supply engines to private teams at a lower cost. There are already a number of potential suppliers under consideration. One of them is said to be Cosworth, which has a long history in the series stretching back to 1963. The British firm stepped back between 2007 and 2009, returned in 2010, and dropped out again after 2013. The development could be of particular benefit to Red Bull, which has been unable to find an engine supplier and could be forced out of the series as a result. The team has long been powered by Renault, but that relationship has grown sour. And the other three engine manufacturers have not been forthcoming in offering an alternative arrangement for the team. Related Video: News Source: AutosportImage Credit: Cosworth Motorsports Ferrari Honda Infiniti McLaren Mercedes-Benz Renault F1 engine contract

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.