94 Honda Civic Del Sol Si W/ Built 12.5:1 B18c Gsr Vtec Swapped Ctr Cams Rsx Itr on 2040-cars

Auto blog

Acura NSX GT3 to make public debut this week at Mid-Ohio

The new Acura NSX had a very long and very public gestation period. The car went through a number of redesigns and revisions, all while enthusiasts watched and waited. With the production version just now ramping up for customer deliveries, Acura revealed that it was working on a race car for FIA GT3 homologation. While the car was shown in New York, no one outside of Honda has seen it testing on track. This week, the NSX GT3 will make its public testing debut at Mid-Ohio Sports Car Course ahead of the Pirelli World Challenge and IndyCar races. View 13 Photos While the car will be on track during testing and practice sessions, it won't actually be competing with the rest of the field. The car is still in the testing phase and won't be fully FIA approved until at least September. Acura is confident that the car will make its racing debut in 2017. The company also made it clear that this is not the final version of the car and that things like aero and engine tuning are still being worked out. Until now, the NSX GT3 has only tested at private events in Europe, Japan and the US. This week, the NSX GT3 will be piloted by Dutch racing driver Peter Kox. Kox drives for RealTime Racing, a team that currently campaigns an Acura TLX GT. This week's car will be the primary tester, though if something goes sideways there are multiple backup cars. The NSX GT3 differs in a number of ways from the road car, most notably its lack of hybrid all-wheel drive system. The NSX GT3 uses the same twin-turbocharged V6 as the road car, but sends all the power through the rear wheels. It also uses the same space frame as the road car. While the road going version receives final assembly in Honda's Ohio factory, final touches to the GT3 car are done elsewhere. Although the car will only be testing on Thursday and Friday, it will be on display all weekend in the paddock. For more info on this weekend's Mid-Ohio race, check out the Pirelli World Challenge page here. Related Video: Motorsports Acura Honda honda nsx acura nsx gt3

Who can really claim first mass-produced fuel cell vehicle delivery in US?

Last month, Hyundai said that the initial deliveries of the Tucson Fuel Cell vehicles in California meant that, "For the first time, retail consumers can now put a mass-produced, federally-certified hydrogen fuel cell vehicle in their driveways." But try telling that to Jon Spallino. In 2005, Honda leased a hydrogen fuel cell FCX, a small hatchback, to the Spallino family (as far as we know, he parked it in his driveway). The company did the same thing again in 2008 with the FCX Clarity, a sleek new design based on the FCX Concept, and others signed for the H2 ride as well, including celebrities. No matter how you slice it, Honda has been in the fuel cell delivery market for almost a decade now. Just look at this. Or this. Or this. Oh, and other automakers (General Motors in Project Driveway in 2006 and Mercdes-Benz with the F-Cell in 2010, for example) have delivered fuel cell vehicles in the US as part of short-term test programs. But let's get back to Hyundai's claim. There's little question that the first delivery of a "fuel cell vehicle for the US market" has already taken place (and they were federally certified, too), which means that the debate revolves around the definition of mass-produced and whether "mass production" is about a number or about the process? Let's investigate below. First, lets review Honda's bona fides. We can start with the official version of Honda's fuel cell history, which is missing the pertinent detail that Honda build the Clarity on a dedicated assembly line and established a small network of three dealerships to lease the FCX Clarity in 2008. All of the FCX Clarity vehicles in customer hands in the US were leased through these dealerships. Sure, Honda started with hand-built stacks in its hydrogen vehicles, but went to automated control of some parts and components with series production. "It is good to see others doing today what we've been doing since 2008" – Steve Ellis, Honda Or, as Honda's Steve Elllis put it to AutoblogGreen regarding Hyundai's fuel cell deliveries: "This was exactly as prescribed by the creation of the California Fuel Cell Partnership. It's the very essence of 'co-op-itition.' We at Honda, as do many others, continue to push forward on many technologies, both the battery and the fuel cell. And society is the beneficiary." Then he added, "It is good to see others doing today what we've been doing since 2008." Now, how does Hyundai compare?

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.