2018 Honda Civic Si on 2040-cars

Auto blog

Honda Civic Hatchback production design pops up in patent shots

Here's a surprise (not!) – the production Honda Civic Hatchback is going to look almost exactly like the concept Honda Civic Hatchback. We can make this judgment based not on common sense, but on a round of patent images uncovered by the Hondaphiles over at the CivicX forums. Notice we said "almost exactly like the concept." There are some obvious changes on this new five-door hatch compared to the Geneva Motor Show showcar, particularly on the front and rear fascias. In back, the twin center-exit exhausts are gone (boo – though those might come back for hotter Si or Type R models), with no visible outlets on these images. In front, the overall look of the fascia is the same, but we're betting it will be toned down – expect less gloss black trim and a smaller chin spoiler. While it goes without saying, the new Civic Hatch will also ditch the more traditional concept car trimmings. Those big wheels, aggressive side sills, and neon-green accents also won't make production. But the good thing here is how true the production model will stay to the concept. The rear spoiler is still there, and the overall look of that shapely rear end is unchanged. And of course, from the B-pillar forward, this is the same Civic we've enjoyed in both Coupe and Sedan varieties. While it's a safe bet that these images are legit, we couldn't find anything in the US Patent and Trademark Office's website. We've reached out to Honda to get confirmation on these pics. Stay tuned. Related Video:

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

NSX Concept-GT is the world's hottest way to boil water

The Honda NSX Concept-GT is one sexy machine, and it looks to be a very effective tool on a race circuit. But Honda's latest web spot leads us to believe that it also can be used to make tea.
In the video, the racecar is hooked up to an apparatus that uses tubing to harness the energy from the car's 500-horsepower hybrid drive system, using it to boil water. The novel tea-making technique reminds us a bit of a couple other inventive Honda commercials, namely Hands and Cog.
Watch the NSX ad below, and be sure to turn the sound up to hear that glorious engine note.