2013 Honda Cr-v Ex-l on 2040-cars

Auto blog

Honda getting in on the Daytona Prototype racing action

Racing fans at Sebring are plenty used to seeing Honda powering into the winner's circle, the Japanese motor company having claimed class victories at the endurance race in Florida in 2007, 2009, 2011, 2012 and 2013. Those were all in the LMP2 category, but with the Twelve Hours of Sebring now part of the combined United SportsCar Championship, Honda is branching out into another class: Daytona Prototypes.
The purpose-built racing machinery that were once part of the Grand-Am series are now racing alongside the LMP2 prototypes from the American Le Mans Series under the united championship. So far Ford and Chevy have signed on to power the Daytona Prototypes, and now Honda's joining their ranks as the only manufacturer to field entries in both categories of the championship's Prototype class.
The competition-spec 3.5-liter twin-turbo V6 revealed last month is based on the same J35 engine that powers everything from the Honda Accord to the Acura RLX and MDX. Now it will power the Riley chassis fielded by Starworks Motorsports, competing alongside the pair of Honda Performance Development (HPD) ARX-03b chassis which Extreme Speed Motorsports will campaign under LMP2 regulations, giving Honda a two-pronged, three-car assault on the top class of the new American sports car racing series.

2014 Honda HPD CR-Z

Honda invited us to its Southern California North American headquarters last week to take a spin in a very special CR-Z - one modified with a full complement of Honda Performance Development (HPD) components. While the company has been racing with HPD parts for years, this is the first time the automaker has offered them for its street-legal vehicles, and it has chosen this year's SEMA Show in Las Vegas to be the launch venue. Last year, Honda introduced the HPD Supercharged CR-Z Concept at SEMA - this is the slightly modified production version.
The complete transformation gives the normally placid hybrid hatchback a serious shot of adrenaline thanks to a bolt-on supercharger combined with suspension, tire, brake and exhaust upgrades. In addition to the blower (detailed in a bullet point below), new HPD suspension components lower the car by about half an inch, and firmer spring rates stiffen the ride. Stock 16- or 17-inch wheels are then replaced with HPD 18-inch alloys wrapped in sticky Michelin Pilot Super Sport tires (215/40ZR18 at all corners). The clutch is upgraded, a limited-slip differential is installed and new HPD monobloc four-piston calipers are fitted over slotted and ventilated iron rotors up front (the single-pistons over solid discs on the back axle are unchanged). In the rear, the stock hidden single exhaust pipe is replaced by a free-flow twin-tip exhaust that peers out of a new HPD lower diffuser. Other cosmetic enhancements include an HPD front lip spoiler, rear deck lid spoiler and an HPD emblem kit for each side. To say the CR-Z is transformed by the complete HPD package is an understatement.
Driving Notes

Pair of perfect Honda NSX Type Rs go up for auction in Tokyo

While the original Acura NSX is a brilliant supercar in any of its iterations, we never got the best version of it here in America: the Type R. Those came with Honda badges and are right-hand drive only. Unless you're in Japan or are lucky enough to come see an imported example elsewhere, you're not going to come across one of these. To see two practically perfect examples go up for auction at the same time is an even rarer sight. Some first-generation NSX Type R models (1992-1995 model years) can be imported to the U.S. now that they have surpassed the 25-year mark. However, this 1995 model is still a hair too new. Should that stop you from buying it and waiting a few months to take U.S. delivery? Certainly not. This car being offered at Tokyo's BH Auction with a grand total of 534 miles on its odometer. The seller claims it's 100% original and in pristine condition. Honda did a lot to transform the NSX into the first Type R of many to come. To start, engineers cut 308 pounds out of the car by using aluminum in even more places than before, deleting sound deadening, eliminating the A/C and stereo and using carbon-kevlar Recaro bucket seats. The 3.0-liter V6 was balanced and blueprinted. Then the suspension was given a full makeover with stiffer dampers, springs, bushings and a larger front sway bar. There were plenty of other little things throughout, but we'll spare you the long list. The number you need to know most is the estimated auction price. BH Auction thinks this NSX Type R will go for $227,000 - $272,000. 2005 Honda NSX-R View 21 Photos Next up is the ultra-rare 2005 Honda NSX-R. This R was based-off the NA2 NSX, so it has a 3.2-liter V6 and six-speed manual transmission with the new bodystyle that ditches the pop-up headlights. The 2005 model year was the last for the first-gen NSX, meaning this R is just about as new as they come. Many of the modifications that Honda did for the first Type R were repeated here. This model used carbon fiber more judiciously, though, replacing the hood, deck lid and spoiler with the lightweight material. The auction house claims just 140 NA2 NSX-Rs were made, so this is an incredibly rare car. Sadly, nobody here will be able to import it and drive it on American roads for quite some time yet. The price is estimated to come in at $345,000 - $436,000. That's pricey but this NSX has an even lower odometer reading than the other at just 348 miles.