2009 Honda Accord Ex-l Sedan 4 Door 3.5 V6 on 2040-cars

Auto blog

Honda's slate for Tokyo Auto Salon includes S2000 revival, many Mugens

Honda has pulled back the covers on what we can expect to see at the 2013 Tokyo Auto Salon, including what looks to be an S2000 refresh some four years after the convertible left production. The S2000 Modulo Climax is an "exhibition model" based on the old roadster, but features updated front and rear fascias as well as an interior trimmed out in black and burgundy. Beyond that, details are scarce as hen's teeth.
Honda will also show off a number of vehicles based on the N-One mini, including the N-One Modulo Style, Mugen Racing N-One Concept and an N-One worked up by the Japan Nailist Association. That last creation features plenty of rhinestone decoration. (We wish we were joking.) Mugen will also display a tarted-up CR-V Design Study as well as the CR-Z Mugen RZ: a 300-unit specialty vehicle.
Meanwhile, the manufacturer's motorcycle arm will show off the Goldwing F6B, previously seen at EICMA 2012 as well as the CB1300 Super Four Special Edition and the NC700X. The automaker will also pepper its stand with a few of its racing machines for the public to enjoy. Check out the full press release below.

Honda CR-Z gets much-needed supercharger

Honda has really taken its time in getting an aftermarket supercharger kit for the CR-Z to enthusiasts in the US. It's finally on sale, though, and it makes you wonder if the hybrid hatchback shouldn't have had it from the day it went on sale.
The supercharger kit developed by Honda Performance Development boosts output from the CR-Z's 1.5-liter, four-cylinder engine to 197 horsepower and 176 pound-feet of torque, according to Honda spokesperson Jessica Howell, an improvement of 67 hp and 36 lb-ft. It also adds an air-to-air intercooler, high-flow fuel injectors, a recalibrated ECU and new air filter for $5,495, before installation. However, the setup only works for six-speed manual transmission models from the 2013 and 2014 model years. If you want to take things even further, HPD is also offering an optional limited slip differential for $1,375 and sport clutch for $640, according to Howell.
Development of the supercharger kit has been ongoing for years. We first saw it on the CR-Z Mugen RZ in 2012 in Japan, in which it barely bumped power to 153 hp. Later at SEMA, Honda improved things to a more respectable 185 hp. Then in 2013, we actually got to drive an early version boasting 190 hp and found it a solid improvement over the stock powertrain. It appears Honda had some further tweaks to get things to the current 197 ponies. More good news: assuming you get the package installed at a dealer, the car maintains the balance of its 5 year/ 60,000 mile Honda limited powertrain warranty.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.