1996 Honda Accord Lx on 2040-cars

Auto blog

2016 Honda Pilot First Drive [w/video]

For all it had going for it, the second-generation Honda Pilot was stung by one undeniable fact: it looked like a big, boxy SUV at a time when consumer favor was shifting towards car-based crossovers. For 2016, though, Honda is offering a third-generation Pilot that not only does away with the old model's brutalist looks, but also adopts bleeding-edge safety technology and fuel-efficient powertrains. The Pilot's new styling still doesn't really work, to our eyes. That's not because of the CR-V-inspired headlights or Accord-derived grille. It's not even because of the horizontally oriented, reshaped taillights. The biggest problem with the Pilot is its profile. The hood is an inch lower for 2016, and the CUV is 3.5 inches longer than its predecessor with an extra inch ahead of the front axle. Simply put, the proportions are out of whack. The hood is too short, the passenger compartment too large, and the beltline too low. It's little wonder then that both Autoblog staffers and readers have pointed out the 2016 Pilot's minivan-like resemblance. Changes underneath the Pilot's sheetmetal are just as drastic. Honda incorporated a mix of high-strength steel, aluminum, and even magnesium to create the CUV's new bones. Taken as a whole, our top-of-the-line Elite tester is 286 pounds lighter than the previous model, while being 25 percent more rigid overall. Aside from some penny pinching in the cabin – the hard plastic on the top of the rear door panels is particularly egregious – the Pilot's interior is home to soft-touch plastics, quality leather, and handsome piano black accents. Front passengers are treated to broad, comfortable, power seats, complete with heating and ventilation (depending on trim). What they lack in outright support through the turns, they make up for in long-haul comfort. Honda will continue to sell the Pilot with seating for eight, but for the very first time, it's also offering a pair of captain's chairs in place of the second-row bench. Either setup is comfortable, though the seven-passenger layout allows easier access to the third row. As for the way-back, it can accommodate two kids or two adults in a pinch, but we aren't sure how Honda thinks three humans of any size will fit back there. Happily, Honda ditched the two-screen center stack setup found elsewhere in its model range. The Pilot's ample eight-inch display (standard on the Touring and Elite trims) has menus that are easy to manage.

Honda favoring turbo over hybrid for US-market Vezel

While Honda gears up to unveil the new Fit to the US market at the Detroit Auto Show next month, back in its home market, the car's crossover cousin is just going on sale. The Vezel was unveiled at the Tokyo Motor Show last month and already has a three-month waiting list in Japan, where Honda projects that 90 percent of customers will opt for the hybrid version. Not so in the United States, however.
When the Vezel reaches American showrooms, there'll be a number of key differences. For starters, it will carry a different name, though Honda isn't saying what that will be. For another, it will be built for North American consumption at Honda's new plant in Mexico, roughly half of whose production capacity is reportedly being allocated to the new crossover. And finally, it'll have a different engine.
In Japan the Vezel is being offered with a 1.5-liter four-cylinder engine, with or without electric assist. Honda won't offer the hybrid version here - at least not initially - but it is preparing to offer a turbo option. Although it has yet to announce US specifications and options, the 1.5-liter turbo four (also unveiled at the Tokyo show) is considered a stronger likelihood than the 1.0- or 2.0-liter versions.

Acura replaces chief Accavitti with designer Ikeda

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.