2014 Honda Accord Sport on 2040-cars

Auto blog

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.

Toyota, Honda, Mazda and Nissan recall 3.4 million vehicles for faulty airbags

Most vehicle recalls that take place these days are a result of some problem that happens during the manufacturing process by the automaker, but as we see here, parts suppliers can also factor in to problematic safety issues. Automotive News is reporting that a total of 3.4 million vehicles produced by Japanese automakers between 2000 and 2004 are being recalled globally due to faulty airbags produced by an outside supplier, Takata Corp.
According to the report, vehicles from Toyota, Honda, Nissan and Mazda are being recalled because of passenger front airbags that do not inflate properly. Globally, Toyota is said to be recalling around 1.73 million cars including 510,000 in the US composed of Toyota Corolla, Matrix, Sequoia and Tundra as well as the Lexus SC430 for the 2001 through 2003 model years; this is the second time this year the 2003 Corolla and Matrix have been recalled for an airbag problem. Honda is recalling 1.14 million models, Nissan another 480,000 and Mazda 45,463. The article says that Takata supplied faulty airbags to non-Japanese automakers, but it did not specify which ones.
Honda and Toyota have released information on their own websites about the recall, while Nissan and Mazda have not yet commented. Read official press releases from Honda and Toyota, below, and look for updates as we have word from the others.

Honda working with new supplier Autoliv for Takata inflator recall

Takata is fighting against US regulators over whether to expand its airbag inflator recall nationwide, but the affected automakers are continuing to broaden their own campaigns to get these vehicles fixed. Honda is the first company to take the bold move of partnering with another supplier for its replacement parts. It just announced plans to work with Autoliv to create components for models needing repaired in the US. "The agreement is made in order to meet the expanded supply of inflators needed by Honda and is subject to definitive documentation," Autoliv said in a statement. The company plans to add the extra capacity for these replacement parts at its existing factories, and deliveries are expected to begin in six months. The decision to switch suppliers was quite surprising because the choice was largely considered impractical previously. Automakers believed that changing manufacturers could take as long as a year or more to implement. However, Autoliv apparently found a way to accelerate that. According to Reuters, Honda said at a hearing in the House of Representatives on December 3 (pictured above) that it was in talks with Autoliv and another supplier called Daicel about building more inflators. The extra parts are sure to come in handy for Honda, as it is now officially expanding its driver side inflator recall nationwide. Although, that that option was already available to any concerned drivers who asked for the remedy. Even with added capacity, Takata had estimated it would take two years to manufacturer enough replacements to fix all of the affected vehicles from all of the automakers. Scroll down to read Autoliv's statement on its new role. Autoliv to supply replacement airbag inflators to be used by Honda (Stockholm, December 3, 2014) – – – Autoliv, Inc. (NYSE: ALV, and SSE: ALIV sdb), the worldwide leader in automotive safety, will supply replacement airbag inflators to be used by Honda Motor Company in support of the ongoing field action initiatives in the United States. The agreement is made in order to meet the expanded supply of inflators needed by Honda and is subject to definitive documentation. In order to be able to meet increased demand, Autoliv will build additional inflator capacity in its existing manufacturing facilities. Deliveries are estimated to commence after a period of about six months from today.