Entertainment - Factory 20s - Quad Buckets on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

GMC shows how the 2022 Hummer could have looked even more futuristic

Excitement filled the room when GMC asked its designers to resurrect the Hummer in April 2019, but a tinge of uneasiness permeated the department after executives locked in an early 2020 unveiling date. Luckily, stylists knew what they wanted early on in the development phase, and preliminary design sketches give us a fascinating look at how they shaped the electric off-roader that ended up making its global debut online in October 2020. Hummer, the brand, unceremoniously shut down in 2010 after General Motors failed to sell it to the Chinese, but its design DNA was so strong that stylists were able to pick up where their predecessors left off. All of the sketches published on Instagram by the official General Motors Design account show a boxy truck with a tall front end, a short windshield, and a generous amount of ground clearance. These styling cues trace their roots to the AM General Humvee that entered production in 1984 and made its combat debut when the United States invaded Panama in 1989. Even the wildest drawings still depict a pickup that's immediately recognizable as a Hummer. Most of the early design sketches wear some variation of the seven-slot grille that characterized Hummer's production models; it's a styling cue that hints at a heritage shared with Jeep under the American Motors Corporation (AMC) umbrella. Oddly, none wear the round headlights seen on the H2, the H3, and the HX concept that nearly became the H4. Was GMC afraid that its Hummer would end up looking too much like a Jeep? And, at least one sketch shows a fold-down windshield, a feature that will not make it to the assembly line. Sketches never reach production without modifications made in the name of packaging and safety concerns, and the Hummer is no exception, but stylists did a good job of reinventing the brand's design language without copying or erasing the past. If the company had stuck around long enough to make a second- and a third-generation H2, odds are it would look a lot like the GMC-branded model that will enter production in a year. GMC remains on track to start 2022 Hummer deliveries in late 2021, though it told Green Car Reports that it still hasn't built a fully functional prototype yet. When it arrives, this outdoorsy pickup will land in a burgeoning segment of the truck market that numerous models (including the Rivian R1T and Ford's electric F-150) will also call home.

United States drivers buying fewer Mexican-made cars

Crossovers and pickup trucks are not only growing in market share, they're also more profitable than cars. A crossover on the same platform as a sedan retails for thousands more, despite similar components. It's one of the reasons we've seen automakers rapidly shifting production of their sedans and hatchbacks to Mexico, where cheap labor preserves the thin profit margins on these inexpensive vehicles. But as the market continues to shift in the United States, Mexico is getting burned by its lack of product diversity. The country's auto exports, which are heavy on cars, suffered a 16-percent drop last month, Automotive News reports. In total, year-over-year exports fell from 233,515 to 197,020 last month, while year-to-date exports are down by 7.4 percent, from 922,029 to 854,118. The number one culprit? America – which usually accounts for 75 percent of Mexico's exports – and its appetite for crossovers and pickup trucks bolstered by cheap gas prices. While Mexico does build some light truck models – AN specifically calls out the Ram 2500, Honda HR-V, GMC Sierra, and Toyota Tacoma as export leaders – the vast majority of vehicles rolling out of its factories are sedans and hatchbacks. In fact, the three biggest drops in Mexican exports came from companies whose south of the border factories only build cars – Ford (Fusion/Lincoln MKZ and Fiesta), Mazda (Mazda3), and Volkswagen (Golf and Jetta). Mexican Automotive Industry Association President Eduardo Solis told AN the export shortfall will likely be sorted out sooner rather than later, thanks to a pair of new factories – a Kia car factory and an Audi SUV plant – that are coming online by year's end. The two facilities will add around 100,000 vehicles to the country's export totals, which Solis said should leave the industry on the verge of breaking another export record in 2016. But how sustainable will these record-breaking years be? Slapping an "Hecho en Mexico" sticker on a new German SUV won't be enough to change the fact that Mexico's product mix is tilted too heavily towards body styles that are not growing in volume. Mexico's record-breaking export years probably aren't at an end, but we'd argue they're certainly under threat. News Source: Automotive News - sub. req.Image Credit: Omar Torres / AFP / Getty Images Plants/Manufacturing Ford GMC Honda Mazda RAM Volkswagen Truck Crossover SUV Mexico