3 Rows Leather Back Up Camera Navigation Remote Start Sunroof Onstar Heated Dvd on 2040-cars

Auto blog

2017 GMC Canyon steals Cadillac's V6 for a little more power

GMC is fortifying the Canyon with a new powertrain and two new trim levels for 2017. GMC will give the Canyon the 3.6-liter V6 found in the Cadillac ATS, CTS, CT6, and XT5 crossover. The engine will be matched to an eight-speed automatic transmission, which also can be found on Cadillacs, the new 2017 Colorado, and other General Motors vehicles. The new engine comes with variable valve timing, improved direct injection, and Active Fuel Management, which is a form of cylinder deactivation that shuts off two cylinders to increase fuel efficiency and performance. Power is up from 305 to 308 horsepower, while torque increases from 269 to 275 pound-feet of torque compared to the old 3.6-liter V6. With the new transmission, the Canyon benefits from a higher first gear ratio, which should help drivers get off the line more easily when towing large cargo, and lower overdrive ratios for improved fuel efficiency. The 2016 model had a six-speed automatic. The Colorado also gets the eight-speed transmission for '17. GMC previously announced the All Terrain X and Denali models. The All Terrain X trim is offered on the SLE model and comes with the new 3.6-liter V6 engine or the 2.8-liter Duramax turbo-diesel. The All Terrain X gets Goodyear Wrangler DuraTrac P225/65R17 all-terrain tires, a body-color grille surround and matching rear step bumper, bespoke 17-inch aluminum wheels, and a spray-on bedliner. The truck also is fortified with Hill Descent Control and an off-road suspension. The Denali carries the flag as the most luxurious Canyon model and gets a Bose seven-speaker audio system, more chrome, and interior upgrades. In addition to the new models and the powertrain, the 2017 Canyon will be offered with new colors – Dark Slate Metallic, Mineral Metallic, and Red Quartz Metallic – a new IntelliLink radio with a seven-inch touchscreen, a heated steering wheel as an optional extra, and Standard Teen Driver Mode. The 2017 Canyon, with all of its changes, will be available in the fourth quarter of the year. Related Video: Featured Gallery 2017 GMC Canyon Denali: LA 2015 View 14 Photos News Source: GMC Cadillac GMC Truck Luxury Off-Road Vehicles engine gmc canyon chevrolet colorado

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

GM to build outgoing Silverado and Sierra until late 2019

As it has done with previous generations, General Motors is keeping the outgoing versions of its 1500 pickups in production despite the arrival of the all-new 2019 Chevrolet Silverado and 2019 GMC Sierra. The production of the previous, K2 generation models will begin to be wound down gradually, according to Automotive News, starting with crew cabs "early next year," and double and regular cab models following during "the early second half of next year." The old model trucks will continue to be built into "late 2019" based on market demand, GM's spokesperson Kim Carpenter said. The Chevrolet will go by the name Silverado LD, with the GMC Sierra designation still to be announced. Some of the outgoing models are built by sharing the assembly work between two GM plants. Partially finished Silverado and Sierra double cab bodies are shipped from Fort Wayne, Ind., to Oshawa, Ont., where the trucks are completed, including receiving paint. This eases the workload in Fort Wayne, where production of the new T1 generation trucks started in July 2018. In January, the Silao plant in Mexico will take on the duties of building new generation regular cab and crew cab trucks. Carpenter also said that the "Oshawa shuttle," as the shared production is called, has been very successful. As a result, 60,000 more trucks will be built than what the original production forecast initially called for. GM's latest quarterly profits, disclosed last week to be $1 billion, have been far higher than expected and will result in full-year profits far higher than what had been predicted in light of steel tariffs. GM isn't the only truck maker taking a similar multi-generation approach for 2019. Both the outgoing and redesigned Ram 1500 are in production, with the previous generation being dubbed Ram 1500 Classic. Related Video: