2022 Gmc Yukon 4wd Denali on 2040-cars

Auto blog

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles

Could the GMC Jimmy come back as a Wrangler fighter?

Every three or four years, two cars go into heavy media rotation in stories about supposed new competitors. The headlines go something like, "X automaker working on a vehicle to fight the iconic Y." The Y cars are the Porsche 911 and the Jeep Wrangler. For this story, the X automaker is GM. And since GM already has its 911-fighter poised for debut next month, we speak here of the Wrangler. Car and Driver writes that GMC might take another shot at a Jeep challenger, this time by rebirthing a body-on-frame Jimmy SUV. For any who don't know, GMC sold an S-15 Jimmy from 1982 to 2005, a twin of the Chevrolet S-10 Blazer. Those SUVs started their lives as the Chevrolet S-10 and GMC S-15/Sonoma pickups. The Blazer name has returned to the light, albeit without its old-school rugged manners. There's still an opening on the GMC side, though, so C/D says the idea would be to work that old magic on the GMC Canyon pickup. The report is more chaff than grist for the rumormill, with liberal application of phrases like "looking to come up with," "could be," "could take," and "could arrive." Having said that, a potential Jimmy model could come in a few years, could use the same six-cylinder gas and four-cylinder diesel engines as the Canyon, and could start around $30,000. The Jimmy could wear GMC's new mud-and-guts AT4 trim name, or become a mud-and-guts trim for the Canyon just as the ZR2 is for the Colorado. It's not an entirely crazy idea, however, when a body-on-frame Trailblazer SUV based on the Colorado sells in Latin America, Asia, and Australia and does pretty well in the mud and muck. GM's been on the edge of going to war with the Wrangler for at least 12 years, when a Hummer exec said the HX concept would debut at the 2008 Detroit Auto Show and go on sale in 2010 as the H4. In 2015, The Wall Street Journal said GM was canvassing GMC dealers about something to get in the ring with the Wrangler. And all that was before every other automaker had to watch Jeep open a money-counting operation to handle its Wrangler profits, and dealers started charging $20,000 markups on Gladiators. In May, spy shooters caught a sensor-laden Jeep running at GM's Milford Proving Grounds in Michigan. Earlier this month, Bloomberg reported GM is considering a Hummer revival as an all-electric hardcore SUV. So we will not be surprised if GM rolls out a Wrangler fighter in the near-ish future. But we won't be surprised if GM doesn't, either.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.