2019 Gmc Yukon Slt on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Son surprises his dad by restoring his 1949 pickup for Christmas

Norman Meal, an 83-year-old retired farmer from Rushville, IN, nearly missed his big Christmas gift when his son, Kyle, first presented it to him. Norman was oblivious and was looking all over the garage floor until Kyle pointed out a satin black pickup with a bow on it parked inside. This wasn't just another case of a child buying a parent a dream vehicle; the '49 GMC sitting there was Norman's very first truck that was restored and ready to drive. According to Fox 59 WXIN, Norman's father purchased the GMC in 1949, and Norman bought it from him in the mid '50s to use on the farm. However, for about the past 13 years, the truck had been rotting away in the garage of one of Kyle's friends. As a perfect gift to his dad, Kyle took the pickup to a restoration shop to make the old vehicle roadworthy again. Practically everything was replaced – except for the horn. Thankfully, Kyle filmed his dad's reaction to getting the GMC. Check it out and watch them take a drive in the heartwarming video above.

GM recalls 51k Enclave, Traverse, Acadia crossovers over fuel gauge inaccuracy

With all eyes fixed on General Motors in the wake of the ignition recall debacle, the auto giant has been carefully calling in a wide array of vehicles to fix anything and everything that could prove problematic. Just the other day it issued two separate recalls - one concerning the Cadillac SRX and another its heavy-duty pickups - and now it is issuing another.
This time the vehicles in question are the Buick Enclave, Chevy Traverse and GMC Acadia, three fullsize crossovers based on GM's Lambda platform. In an estimated 51,640 units manufactured between March 26 and August 15, 2013, the engine control module has been found to incorrectly display the level of fuel in the tank.
As a result, owners are being notified to bring their vehicles in to their local dealers to have the ECU reflashed to fix the problem. View the full details in the announcement below from the National Highway Traffic Safety Administration.