2015 Gmc Yukon Sle on 2040-cars

Auto blog

2019 GMC Sierra spied sporting just a thin wrapping

A new Chevy Silverado is on the way, and along with that comes it's fraternal twin, the GMC Sierra. We've seen spy shots before, but, like the Silverado we saw a few days ago, this is our best look yet. Nearly all of the loose-fitting camouflage has been removed, giving us a decent view of the bodywork. A brief look shows that the Sierra and Silverado will have significant styling differences for this generation. In the past, GMC trucks have been little more than rebadged Chevrolets. That's been changing in recent years, and the divide seems to be growing larger. The grille looks much larger than the Silverado's and there appears to be a small inlet right where the hood meets the front. From the side, we can see that the two trucks have different fenders and beds. The wheel wells on the GMC are squared off at the rear. Compare that to the round wells on the Chevy. Out back, the design is far more similar. Both trucks appear to have rear-facing exhaust outlets. The taillights, too, look to have close to the same shape. A big bulge in the center of the tailgate likely hides a large GMC badge. We still don't have a firm reveal date, but look for some further news this auto show season. Related Video:

Son surprises his dad by restoring his 1949 pickup for Christmas

Norman Meal, an 83-year-old retired farmer from Rushville, IN, nearly missed his big Christmas gift when his son, Kyle, first presented it to him. Norman was oblivious and was looking all over the garage floor until Kyle pointed out a satin black pickup with a bow on it parked inside. This wasn't just another case of a child buying a parent a dream vehicle; the '49 GMC sitting there was Norman's very first truck that was restored and ready to drive. According to Fox 59 WXIN, Norman's father purchased the GMC in 1949, and Norman bought it from him in the mid '50s to use on the farm. However, for about the past 13 years, the truck had been rotting away in the garage of one of Kyle's friends. As a perfect gift to his dad, Kyle took the pickup to a restoration shop to make the old vehicle roadworthy again. Practically everything was replaced – except for the horn. Thankfully, Kyle filmed his dad's reaction to getting the GMC. Check it out and watch them take a drive in the heartwarming video above.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.