2011 Navigation Sunroof Rear Dvd Leather Heated V8 We Finance 41k Miles on 2040-cars

Auto blog

GM follows up Lambda CUV stop-sale with tire recall

In late January, General Motors announced a stop-sale for about 6,281 examples of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave because of the possibility for the treads cracking on their 18-inch Goodyear Fortera HL tires. At the time, GM said that this would also eventually lead to a safety campaign to repair the problem, and the National Highway Traffic Safety Administration has just published those details. GM's recall covers 5,876 of the three Lambda platform crossovers to replace their tires. According to NHTSA, if the treads crack, there could be a loss of pressure and possible failure. Goodyear already announced its own recall of the tires after internal testing found small tread cracks. The company did not believe this was safety issue, but the problem did put the rubber out of compliance with federal laws. The business's safety campaign covered an estimated 48,512 tires. Of those, around 32,000 were reportedly made for GM to either be fitted to vehicles or sold as replacements. The remainder went to the aftermarket. Goodyear's portion of the recall is expected to begin around February 20. RECALL Subject : Tire Tread Cracking/FMVSS 110 Report Receipt Date: JAN 28, 2015 NHTSA Campaign Number: 15V044000 Component(s): TIRES Potential Number of Units Affected: 5,876 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2015 CHEVROLET TRAVERSE 2015 GMC ACADIA 2015 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Buick Enclave vehicles manufactured December 9, 2014, to January 14, 2015, 2015 Chevrolet Traverse vehicles manufactured December 9, 2014, to January 20, 2015, and 2015 GMC Acadia vehicles manufactured December 9, 2014, to January 16, 2015, and all equipped with Goodyear P255/65R18 Fortera HL tires. These vehicles are equipped with tires that may experience tread cracking. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or Less." CONSEQUENCE: If the tire treads crack, a loss of tire pressure and possible tire failure may result, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will replace the tires that were manufactured within a specific date range, free of charge.

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.

5 things we love about the 2019 GMC Sierra AT4

NEW YORK — The 2019 GMC Sierra AT4 proves that GM's upmarket truck and SUV brand is getting serious about offering rough-and-tumble capability to rival the Ford F-150, Toyota Tundra, Ram 1500 and Nissan Titan. Until the Sierra AT4 rolled onstage at a media event in lower Manhattan, prior to this year's New York Auto Show, the GMC brand had been more focused on luxury touches like fancy chrome wheels and posh interiors — no surprise, considering the upscale SLT and Denali trim levels account for the vast majority of GMC sales. So now GMC wants to get muddy and adventurous? Well, yes and no. The AT4 adds hardware that'll take truck buyers off the beaten path, though this GMC isn't anywhere close to being a Spartan, no-frills work truck. To better explain, let's look at five key features we love about the 2019 GMC Sierra AT4: More than stickers and chrome The Sierra AT4 isn't a cynical marketing ploy, there is some true all-terrain toughness built into this pickup truck. A factory-installed lift kit raises the AT4 by two inches, while Rancho monotube shocks, a locking rear differential, a two-speed transfer case and standard all-wheel drive prove this GMC can dare to venture off paved surfaces — though you might risk getting mud and muck on the truck's handsome 18- or 20-inch alloy wheels. Power and economy The Sierra AT4 comes standard with a 5.3-liter V8 coupled to an eight-speed automatic transmission. In the standard Sierra 1500, this engine produces 355 horsepower. GMC didn't mention engine specs here in New York, though it's possible the AT4 might get a small power bump. This engine should be plenty for most truck buyers, though GMC offers two tempting alternatives. These include a turbo-diesel 3.0-liter inline-six, along with a 6.2-liter V8. Both motors are paired to stop-start fuel-saving systems, along with a new 10-speed automatic transmission. Carbon fiber cool factor The GMC Sierra's available carbon-fiber cargo bed, called CarbonPro in GMC-speak, trims 62 pounds of weight, as compared to a traditional all-steel bed. This slick feature uses carbon composites for interior panels and, judging from GMC's videos of burly bricks and huge hammers being thrown into a CarbonPro cargo bed, it should prove more than up to the task of ... well, having someone throw bricks and hammers into the cargo area.