2007 Gmc Yukon Xl 1500 Denali Loaded! Leather Interior! on 2040-cars

Auto blog

2014 GMC Sierra 4.3L V6 to offer segment-best 305 LB-FT

General Motors has released more information on the 4.3-liter V6 available in the 2014 GMC Sierra. The engine will serve up 285 horsepower and 305 pound-feet of torque, with a six-speed automatic transmission, and giving the V6 Sierra a maximum tow rating of 7,200 pounds in regular cab, short bed four-wheel drive configuration. GM claims that figure is 500 pounds more than the equivalent Ford F-150 equipped with a 3.7-liter V6, and 700 pounds more than the Ram 1500 with its 3.6-liter V6. Buyers can expect to see the 2014 GMC Sierra with the 4.3-liter engine start at $25,085 including destination.
While the engine does deliver more torque than either of its main competitors, it falls short on the horsepower front. The 3.7-liter V6 in the F-150 develops 302 hp while the 3.6-liter V6 in the Ram 1500 yields 305 hp. GM says fuel economy estimates for its newest entry will land later this year. Check out the full press release below for more information.

2015 Chevy Colorado and GMC Canyon order guides reveal added power

General Motors' Fleet Order Guide system is often the canary in the coal mine for interesting changes on new models. The recent guide for the 2015 Corvette unveiled all sorts of changes that weren't yet known about the sports car. Now, it's time for the 2015 Chevrolet Colorado and GMC Canyon to take their bow in the spotlight, and they look worth the wait. The new midsize trucks are getting a touch more power than first thought, as well as some very nice features.
Extended Cab models of both trucks come standard with a 2.5-liter, direct-injected four-cylinder rated at 200 horsepower at 6,300 rpm and 191 pound-feet of torque at 4,400 rpm. That's a bit more than the 193 hp and 184 lb-ft originally reported for the duo. The standard transmission for the extended trucks is a six-speed manual, but the Work Truck trim is also available with an optional six-speed automatic. Towing for the four-cylinder is rated at 3,500 pounds.
Crew Cab models come standard with a 3.6-liter V6 with 305 hp at 6,800 rpm and 269 lb-ft of torque at 4,300 rpm, with a six-speed automatic. That's also somewhat different than the originally reported rating of 302 hp and 270 lb-ft. Towing for the V6 is rated at 7,000 pounds.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: