Auto blog

Chevrolet Silverado, GMC Sierra could get independent rear suspension

The Chevrolet Silverado and the GMC Sierra could reportedly receive a variant of the four-link independent rear suspension found under the new Tahoe and Suburban. While that's not a surprise, a recent report suggests electrification, not comfort, convinced General Motors to make the change. Replacing the time-tested solid rear axle with an independent suspension will improve comfort, handling and off-road prowess, while adding weight, and likely making the trucks a little bit more expensive. It's a fair trade-off, but GM Authority learned the real reason for the swap is that at least one of the pickups will spawn an electric model, and it's more difficult to package a bulky battery pack around a solid rear axle. The independent rear suspension takes up far less space, even if it has more moving parts. General Motors will build its first regular-production electric pickup on an evolution of the Silverado's T1 platform named BT1, according to the same source. The b stands for -- you guessed it -- batteries. The firm reportedly doesn't want to make two suspensions for cost reasons, so the independent setup will come standard regardless of whether the truck runs on gasoline, diesel, or electricity. As a bonus, Chevrolet and GMC could choose to offer their T1-based trucks with Magnetic Ride Control or an air suspension, options available on the 2021 Suburban and Tahoe. The independent rear suspension will also find its way to the next-generation GMC Yukon due to be revealed January 14, and to the 2021 Cadillac Escalade scheduled to make its debut February 4. The long-rumored, born-again Hummer will get it, too, because it will arrive as an electric model built on the BT1 platform. It's worth noting none of this is official, and General Motors has remained quiet about what's next for its new suspension design, and what will be under its electric truck's sheet metal. If the GM Authority report is accurate, the Silverado (pictured) and the Sierra could ditch their solid rear axle for the 2021 model year. The change will likely be accompanied by other tweaks inside and out. Featured Gallery 2019 Chevrolet Silverado 1500 View 16 Photos Chevrolet GMC Truck

GMC Hummer EV could have had the Chevrolet Avalanche's Midgate

One of the many rumors swirling around the GMC Hummer EV claimed the truck would resurrect the Midgate inaugurated by the original Chevrolet Avalanche. Although we now know there's no way to fully knock down the partition between the cab and the cargo box, the firm revealed the rumor wasn't entirely false. "There was [a Midgate] early on. We opted for the functionality of the drop glass in the back. With the package layout and things like that, it was not advantageous to pursue that one. And, the five-foot bed was kind of the industry standard in regards to price of entry in that segment," explained John Mack, the Hummer's exterior design management, during an interview with Muscle Car & Trucks. The Hummer will go on sale with a five-foot box, and it doesn't sound like a longer bed will be available, so a modern version of the Midgate would have made the model more versatile by giving users the ability to fold down the partition behind the rear seats to carry bulky items, like plywood and ATVs. It's a feature that would have inevitably made the truck more complicated to build, however, because it adds moving parts that need to be sealed. Hinges, seals, and latches in turn add weight, and complexity almost always invites high manufacturing costs. As an electric pickup built with newly-developed components, the Hummer already has enough of each. Motorists who need to carry something that's significantly longer than the cargo box aren't entirely out of luck. As Mack pointed out, the rear window drops into the partition, so owners will have the ability to haul surfboards, lumber, or anything else that's relatively long and reasonably thin by simply pushing a switch. Alternatively, the only thing limiting cargo space when the roof comes off is the sky — or, depending on where you live, bridges. Mack didn't reveal when the Midgate was dropped. GMC launched the Hummer project in April 2019, and it previously released early design sketches that show how the truck transitioned from a sketch to a prototype. As of writing, nothing suggests the Midgate will make a comeback in the near future on any member of the General Motors portfolio. It was introduced in 2001 on the first-generation Chevrolet Avalanche, which went on sale in the United States for the 2002 model year. It later spread to Cadillac's luxed-up variant of the truck, the Escalade EXT, and to the short-lived GMC Envoy XUV.

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.