2003 Gmc Yukon Sle Xl 1500 on 2040-cars

Auto blog

2017 GMC Canyon steals Cadillac's V6 for a little more power

GMC is fortifying the Canyon with a new powertrain and two new trim levels for 2017. GMC will give the Canyon the 3.6-liter V6 found in the Cadillac ATS, CTS, CT6, and XT5 crossover. The engine will be matched to an eight-speed automatic transmission, which also can be found on Cadillacs, the new 2017 Colorado, and other General Motors vehicles. The new engine comes with variable valve timing, improved direct injection, and Active Fuel Management, which is a form of cylinder deactivation that shuts off two cylinders to increase fuel efficiency and performance. Power is up from 305 to 308 horsepower, while torque increases from 269 to 275 pound-feet of torque compared to the old 3.6-liter V6. With the new transmission, the Canyon benefits from a higher first gear ratio, which should help drivers get off the line more easily when towing large cargo, and lower overdrive ratios for improved fuel efficiency. The 2016 model had a six-speed automatic. The Colorado also gets the eight-speed transmission for '17. GMC previously announced the All Terrain X and Denali models. The All Terrain X trim is offered on the SLE model and comes with the new 3.6-liter V6 engine or the 2.8-liter Duramax turbo-diesel. The All Terrain X gets Goodyear Wrangler DuraTrac P225/65R17 all-terrain tires, a body-color grille surround and matching rear step bumper, bespoke 17-inch aluminum wheels, and a spray-on bedliner. The truck also is fortified with Hill Descent Control and an off-road suspension. The Denali carries the flag as the most luxurious Canyon model and gets a Bose seven-speaker audio system, more chrome, and interior upgrades. In addition to the new models and the powertrain, the 2017 Canyon will be offered with new colors – Dark Slate Metallic, Mineral Metallic, and Red Quartz Metallic – a new IntelliLink radio with a seven-inch touchscreen, a heated steering wheel as an optional extra, and Standard Teen Driver Mode. The 2017 Canyon, with all of its changes, will be available in the fourth quarter of the year. Related Video: Featured Gallery 2017 GMC Canyon Denali: LA 2015 View 14 Photos News Source: GMC Cadillac GMC Truck Luxury Off-Road Vehicles engine gmc canyon chevrolet colorado

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

GM Design shows another early Hummer EV sketch

Like a new mother who's still so excited about her one-year-old baby that she can't stop showing ultrasound photos, General Motors is so excited about its biggest new baby, the battery-electric GMC Hummer, that it can't stop showing off development design sketches. The off-road monster with the 200-kWh Ultium battery pack debuted online on October 21 last year. The next day, the GM Design Instagram page posted some of the Hummer's early "theme sketches" leading to the production version. These had a conceptual flair to them, but were rather restrained. A month later, GM uncovered a series of development renderings showing off a much wilder truck bursting with more angles than a geometry text book. The archives have opened up again with a new "ideation sketch," this one between the first believable sketches and the second truck that Master Chief and Doomguy share on their days off.  All three sets of drawings show similar three-box proportions, it's the details that got a ton of love. On this newest sketch, the fenders flare a touch more than on the production truck, but the wheel wells are cut with the kind of clearance found on a Baja 1000 Trophy Truck. Out back, save for the tow hooks, the rear end is totally different than production. The sketch puts illuminated Hummer script across a narrow tailgate flanked by small square, taillights housing six individual elements. Beneath that, a bumper-less rear end puts nothing more than a sloped bash pate between the truck and the rocks it's just scrambled over. To our eyes, this is the best blend of production-ready comfort from the first sketches and zoot suit angles from the second that we've seen so far.  First deliveries of the GMC Hummer EV Edition 1 are expected before the year is out. When we get a chance to absorb the truck in its native habitats, we'll know whether there's cause for disappointment at what could have been. If so, with all this hunger among the monied for something different, we feel like restomodders have been given the perfect head starts on custom rebodied Hummers that would make things right. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.