2000 Gmc Yukon Denali on 2040-cars

Auto blog

GM faces possible class action lawsuit over 8-speed transmission

General Motors has been hit with a class-action lawsuit from owners who allege the eight-speed automatic transmission found in several rear-wheel-drive Chevrolet, Cadillac and GMC models between the 2015 and 2019 model years has a defect that causes the vehicles to hesitate and jerk when accelerating or slowing down. The lawsuit was posted to ClassAction.org and spotted by GM Authority. Problems with GM's Hydra-Matic 8L90 and 8L45 transmissions have been well-documented on Internet forums and via complaints filed with the National Highway Traffic Safety Administration, with many reporting damage to their vehicles. The lawsuit was first filed in December in U.S. District Court for the Southern District of Florida but appears to have been transferred recently to New York. Autoblog sought comment from Theodore Leopold, the lead attorney for the plaintiffs. "These transmissions have a common defect," the complaint reads. "Drivers attempting to accelerate or decelerate their cars feel a hesitation, followed by a significant shake, shudder, jerk, clunk, or 'hard shift' when the vehicle's automatic transmission changes gears." The problem also occurs when the vehicles accelerate in a single gear, without shifting, the plaintiffs allege. "Drivers have reported that the shift is sometimes so violent, they feel as though they have been hit by another vehicle." The problem is believed to center on the transmission, torque converter or both. The complaint says it causes undue friction, causing hydraulic systems and gears to function improperly and sometimes leaves metal shavings throughout the transmission, leading to costly repairs and replacement of parts or the entire transmission. It says GM has known about the problems since shortly after it introduced the transmissions, and has issued 13 technical service bulletins, none of which have resolved the problem. GM declined to comment on the lawsuit. The plaintiffs say GM should have warned consumers about the issues and covered repairs under each vehicle's three-year/36,000-mile bumper-to-bumper warranty. They're seeking statewide classes in at least six states: California, Florida, Illinois, New York, Oklahoma and Texas.

2019 GMC Sierra CarbonPro Edition pricing starts above $65,000

GMC is hard at work building carbon fiber beds for its CarbonPro trucks, so it's fitting that the company has finally released pricing for the 2019 GMC Sierra CarbonPro Edition. It's not cheap by any measure. The most "affordable" for 2019 is the AT4 version starting at $66,635. It's also available in Denali trim, and that version starts at $70,020. Both represent an increase of $8,000 to $9,000 more over the base AT4 and Denali models. That may seem like a lot to go from a steel bed to a carbon fiber one, but you're getting more than the bed for that money. GMC also includes unique badging, a Bluetooth bed speaker, rear-camera mirror, surround vision cameras, automatic emergency braking, lane-keep assist, automatic headlights, power side steps, a sunroof, trailer tire pressure monitoring and a color heads-up display to both models. The AT4 specifically gets a Bose sound system, navigation, parking sensors and a cat-back exhaust, too. The Denali adds unique 22-inch wheels. Both only come with the 6.2-liter V8 and 10-speed automatic. To equip a regular GMC Sierra AT4 similarly to the CarbonPro Edition, the price comes out to $64,110. The Denali comparably equipped to the CarbonPro is $67,940. So the bed itself is about $2,000 to $3,000. The 2019 GMC Sierra CarbonPro Edition trucks should be reaching dealers very soon. They will soon be supplanted by the 2020 version, which will add the new 3.0-liter diesel inline-six as an engine option. The AT4 CarbonPro will get some extra black accents for 2020, too.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.