1995 Gmc Yukon Slt Sport Utility 2-door 5.7l Chevy Tahoe K5 2 Door 4x4 2 Owner on 2040-cars

Auto blog

AWD turbodiesel Equinox, Terrain dropped for 2020

Citing low demand, General Motors is dropping the AWD diesel options off the Chevrolet Equinox and GMC Terrain roster. Chevrolet spokesman Kevin Kelly confirmed to CarsDirect that for 2020, the diesel versions of these SUVs will only be offered with front-wheel-drive. CarsDirect notes that with the AWD diesel Equinox and Terrain gone, the only AWD diesel option in this class is the Mazda CX-5 Skyactiv diesel, which is significantly more expensive: As the AWD diesel CX-5 is only available in a fully loaded Signature specification, the $42,045 price tag is almost $10k heftier than the cheapest comparable Equinox, the AWD 1.6-liter diesel LT which starts from $32,495. The 2019 GMC Terrain AWD SLE costs $34,795 in comparison, which works out to being around $7,200 cheaper than the Mazda. The higher trim levels for the Equinox and Terrain are Premier and SLT, respectively. Some reasoning behind the AWD diesel GM SUV's low uptake is their own price difference to base FWD gasoline models: you can get a 1.5-liter Equinox for less than §25,000 listed. While the 2.2-liter Mazda has plenty more power at 168 hp and 290 lb-ft, compared to 137hp and 240 lb-ft in the 1.6-liter GM SUVs, the Equinox and Terrain are notably more frugal – they are rated 32mpg combined, while the Mazda can manage 28 mpg. With better fuel economy and a significantly lower list price, the General Motors twins are at least more wallet-friendly when it comes to numbers, and as the vehicles will cease to be built in that configuration there's likely to be some cash on the hood on ones in stock. News Source: CarsDirectImage Credit: Chevrolet Chevrolet GM GMC confirmed gmc terrain chevrolet equinox

2019 GMC Sierra CarbonPro Edition pricing starts above $65,000

GMC is hard at work building carbon fiber beds for its CarbonPro trucks, so it's fitting that the company has finally released pricing for the 2019 GMC Sierra CarbonPro Edition. It's not cheap by any measure. The most "affordable" for 2019 is the AT4 version starting at $66,635. It's also available in Denali trim, and that version starts at $70,020. Both represent an increase of $8,000 to $9,000 more over the base AT4 and Denali models. That may seem like a lot to go from a steel bed to a carbon fiber one, but you're getting more than the bed for that money. GMC also includes unique badging, a Bluetooth bed speaker, rear-camera mirror, surround vision cameras, automatic emergency braking, lane-keep assist, automatic headlights, power side steps, a sunroof, trailer tire pressure monitoring and a color heads-up display to both models. The AT4 specifically gets a Bose sound system, navigation, parking sensors and a cat-back exhaust, too. The Denali adds unique 22-inch wheels. Both only come with the 6.2-liter V8 and 10-speed automatic. To equip a regular GMC Sierra AT4 similarly to the CarbonPro Edition, the price comes out to $64,110. The Denali comparably equipped to the CarbonPro is $67,940. So the bed itself is about $2,000 to $3,000. The 2019 GMC Sierra CarbonPro Edition trucks should be reaching dealers very soon. They will soon be supplanted by the 2020 version, which will add the new 3.0-liter diesel inline-six as an engine option. The AT4 CarbonPro will get some extra black accents for 2020, too.

2020 GMC Sierra HD pricing announced

Just as with its Chevy twin, pricing for the 2020 GMC Sierra HD has been revealed. Unlike the Chevy, though, prices haven't dropped across the board. The ultimate base prices for the 2500 HD and 3500 HD are technically less than the 2019 models at $37,195 and $38,395 respectively, but that's because those are the reintroduced regular cab models. Matching up the body styles of the last year's cheapest Sierras with their new equivalents, and the prices have crept up a few hundred dollars. But the next highest trim level, SLE, drops in price by nearly $2,000 between equivalent trucks. Equivalent SLT trucks are up nearly $2,000 each, though, and the base Denalis have gone up by about $7,000. This is due in part to the 2020 Sierra Denali no longer being offered with two-wheel drive. Comparing the old and new four-wheel drive models, the price is still up by about $4,000. While the new Sierra HD is only more affordable than the last one in certain circumstances, they all feature more capability. The standard 6.0-liter gas-powered V8 makes an extra 41 horsepower and 84 pound-feet of torque than the old one for a total of 401 horsepower and 464 pound-feet of torque. The 6.6-liter diesel V8 still makes 445 horsepower and 910 pound-feet of torque, but it now gets a 10-speed automatic transmission. Maximum fifth-wheel towing has increased, too. For the 2500, that number jumps from 15,400 pounds to 18,500 in the new model. For the 3500, fifth-wheel towing goes from 23,100 pounds to 35,500 pounds for the new truck. And of course, you can get GMC's fancy MultiPro tailgate on the new Sierra HD. One final note on the Sierra HD's pricing: it has the highest base price of the full-size heavy duty trucks. The Ford F-250 Super Duty is the cheapest at $34,745 and is closely followed by the Ram 2500 at $35,090. The full range of GMC Sierra HD pricing is listed below: Sierra 2500 HD Regular Cab Sierra: $37,195 SLE: $41,595 Double Cab Sierra: $39,795 SLE: $43,595 SLT: $52,195 Crew Cab Sierra: $41,595 SLE: $45,395 SLT: $53,995 AT4: $59,295 Denali: $65,295 Sierra 3500 HD Regular Cab Sierra: $38,395 SLE: $42,795 Double Cab Sierra: $41,195 SLE: $44,995 Crew Cab Sierra: $42,795 SLE: $46,595 SLT: $55,195 AT4: $60,495 Denali: $66,495 Update: The estimation of price difference between 2019 and 2020 Sierra Denalis has been corrected. Additional clarification of Denali price changes has also been added.