04 Yukon Xl 4x4 4wd Heated Leather Alloy Rims Quad Buckets Certified Warranty on 2040-cars

Auto blog

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.

2015 GMC Canyon gets the party started [w/video]

The 2014 Detroit Auto Show press days officially kick off tomorrow, but the night before all the madness commences, General Motors drove its new 2015 GMC Canyon pickup truck out for all to see. To refresh your memory, the Canyon is GMC's new midsize pickup - essentially a re-skinned version of the Chevrolet Colorado that debuted at the LA Auto Show in November.
Many of us at Autoblog prefer the look of the larger GMC Sierra to that of its Chevy Silverado kin, and we're having similar feelings about the new Canyon, especially after seeing it in person. It's sort of a pint-sized version of the Sierra, and it looks great. Clean lines are found throughout, and the Canyon's styling is decidedly premium.
At launch, the Canyon will be offered with the same engines as the Colorado - a 2.5-liter inline four-cylinder engine with 193 horsepower and 184 pound-feet of torque on the base end, and a larger 3.6-liter V6 with 302 hp and 270 lb-ft as an option. The Colorado's 2.8-liter diesel inline four-cylinder will be available after launch. Both two- and four-wheel drive configurations will be available, depending on the model.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: