2019 Gmc Terrain Slt on 2040-cars

Auto blog

2022 Hummer EV Edition 1 pickups ready to go to customers

It's official: Two years after GM announced the electric GMC Hummer pickup, the first couple dozen units have left the line at the GM Factory Zero Detroit-Hamtramck Assembly Center, according to GM president Mark Reuss. In an interview with CNBC to celebrate the milestone, Reuss said 17 Hummer EVs are ready for delivery to customers. This makes the Hummer the first of GM's new Ultium-based EVs to leave the factory, and the second electric pickup on the market after the Rivian R1T. The first 1,200 Hummer EVs made will be Edition 1 models, all of which are Interstellar White outside with Lunar Horizon interiors and bronze badging. Each of the $112,595 pickups is powered by three Ultium motors producing a GM-estimated 1,000 horsepower and 11,500 pound-feet of torque, loaded with features like height-adjusting adaptive suspension, skid rails and rock sliders, 35-inch tires, the diagonal-driving CrabWalk, the launch control system Watts to Freedom that unlocks a three-second sprint to 60 miles per hour, and Super Cruise. Range is a GM-estimated 329 miles when the 200-kWh battery is fully charged. As these filter out to eager owners, GM is prepping the next four phases of the Hummer rollout. About a year from now, in autumn of 2022, Factory Zero will begin production of the first widely available Hummer, the EV3X pickup that starts at $99,995 before destination. Three Ultium motors will provide an estimated 800 horsepower and 9,500 pound-feet of torque to a range estimated beyond 300 miles. Spring of 2023 is expected to deliver the Hummer EV2X pickup at an MSRP of $89,995, utilizing two motors producing a total 625 hp and 7,400 lb-ft over a range also estimated to go beyond 300 miles. Around the same time, the first units of the $105,595 Hummer SUV Edition 1 are planned to head down lines at Factory Zero. Finally, in the spring of 2024, the entry-level $79,995 Hummer EV2 pickup and its two-motor powertrain should arrive, making the same output as the EV2X, but only good for a range of around 250 miles. That won't be all we see from Factory Zero, either. GM invested $2.2 billion in the Detroit-Hamtramck plant that once built bread-and-butter GM fare like the Chevrolet Impala, Buick LaCrosse, and Oldsmobile Toronado in order to turn the facility into its first EV base of manufacturing operations for Ultium products. The battery-electric Chevrolet Silverado and GMC Sierra pickups will be built there, as will the Cruise Origin robotaxi.

Cadillac Celestiq, Lyriq, Hummer, other future GM electric cars: Here's everything we saw at ‘EV Day’

WARREN, Mich. — Today, General Motors held an “EV Day” event at its Warren, Michigan, campus to present its new “Ultium” battery technology, modular electric vehicle architecture and soon-to-come electric vehicles. Unfortunately, we were forbidden from bringing cameras into the event, so while we canÂ’t show you what we saw, we can tell you more about it. While we saw the previously teased Cadillac EV (which we now know to be called the Lyriq) and the GMC Hummer pickup teased during the Super Bowl, there were a number of other future cars at the event, which GM President Mark Reuss assured us are all real vehicles in the works. The biggest surprise came at the end of the event, though, in the Cadillac Celestiq electric sedan, which Reuss described as a future flagship that would be hand-built “very locally.” It had been hiding under a dark sheet all morning, with the front and rear illuminated Cadillac emblems shining from underneath. When the wraps came off, we saw a long, white, four-seat fastback sedan. The 23-inch wheels were pushed out to the very corners of the car, giving it what appeared to be a very long wheelbase. The model on the stage had no side mirrors or visible door handles. The grille mirrored that of the Lyriq crossover next to it, with integrated lighting in lieu of the usual mesh or slats youÂ’d see in an internal combustion car. The entire roof, all the way until it tapered to the tail of the vehicle, was tinted glass. In back, vertical tail lighting ran down the C-pillar before turning rearward across the top of the trunk. Inside, everything below the beltline of the windows — essentially all but the headrests and top portion of the steering wheel, was hidden from view. Behind the Celestiq, a large digital display showed a rendering of its interior. The dash consists of a pillar-to-pillar curved LED display serving as both instrument panel and infotainment system. Protruding forward between the front seats was another touchscreen that appeared to house some more controls, with open area, probably for storage, below it. The rear seats had the same sort of touchscreen between them. Built into the back of the front seats were a pair of rear-seat entertainment screens, much like we saw in the Lyriq. The door panels blended wood, metal and animated lighting to give character and a sense of opulence. GM interior design manager Tristan Murphy was on hand to tell us a bit more about the Celestiq.

2017 GMC Canyon finally goes Denali

You knew this was coming and perhaps you've been waiting for it: the GMC Canyon dressed up in Denali trim. Even though we're getting to see it before its reveal at the LA Auto Show, you'll have to wait roughly one more year to take delivery since it doesn't go on sale until "late 2016." You can spec the trim on the crew cab models with either the 3.6-liter gasoline V6 or the 2.8-liter diesel engine. You know the formula, and it works well on the Canyon. There's a chrome grille, chrome trim around the foglights, chrome side steps, one polished exhaust tip, a spray-in bedliner, and 20-inch ultra-bright wheels. You can get the rest of the truck done up in one of six colors, two fewer than are available for non-Denali trims. The inside comes in Jet Black only, with heated and ventilated front seats, Denali badging, and a unique instrument panel. Check out the press release below for more info, we'll have live images from LA soon. GMC Introduces 2017 Canyon Denali Exclusive design cues, content elevate industry's first premium midsize truck DETROIT, Tuesday, Nov. 17, 2015 – Denali is the ultimate expression of GMC's professional grade style, luxury and capability – and it is coming to the Canyon midsize truck. The 2017 Canyon Denali is being introduced today, ahead of its public debut at the Los Angeles Auto Show. It goes on sale in late 2016. "Canyon is the segment's first and only premium midsize truck, offering unparalleled capability and efficiency matched with maneuverability and refinement," said Duncan Aldred, vice president of GMC Sales and Marketing. "The all-new Canyon Denali builds on that award-winning combination with the distinctive styling, luxurious interior and elevated content that has defined the Denali nameplate since its introduction nearly 17 years ago." Like all Denali models, the new Canyon Denali is distinguished with a unique chrome grille and unique wheels – 20-inch ultra-bright-machined aluminum wheels with painted accents. Exterior cues include chrome fog lamp bezels, five-inch-diameter rectangular chrome assist steps, a polished exhaust tip and a standard spray-in bed liner. The Canyon Denali will be offered in six exterior colors. Inside, a Jet Black interior features Mulan leather-appointed seats with perforated, heated-and-ventilated front seats – exclusive content in the Canyon lineup – along with unique instrument panel and console trim; and Denali-logo sill plates and floor mats.