2014 Gmc Terrain Slt on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.

GM updating fullsize pickups for 2015

As Ford prepares to hit the market with its x-factor, aluminum-intensive F-150 and Ram sales stand tall enough to meet General Motors truck sales eye-to-eye, GM is putting the word out that it's going to add more features to its trucks and do so more regularly. An executive engineer for pickups told reporters that "a whole array" of changes are on the way as soon as the 2015 model year and then would likely come "the year after that, the year after that, the year after that."
Only GM knows the way it plans to go with its fullsize trucks, with almost everyone else - including its dealers - griping about market share at the same time as they applaud profits and hope for clarity and growth. GM raised prices on the Chevrolet Silverado and GMC Sierra not long after launch even as it was losing market share and getting called "the least successful large pickup launch over the last 15 years," further upsetting dealers, then Ram outsold the Silverado in March of this year and led GM to increase incentives. But transaction prices rose with the premium; in the first quarter of this year more than 37 percent of the trucks costing more than $40,000 were the Silverado and Sierra, leading one dealer to say of the Sierra, "You can't sell a cheap one," and the analyst who made that "least successful launch" comment to opine, "GM may have made the right call to go for price over share."
We won't know for a few months what any of these updates will be, but the rumored changes for the Silverado and Sierra appear to cover all the bases, including appearance, capability and fuel economy. Rumors run to higher gear counts, stop-start technology and diesel engines before brand-new pickups come for the 2019 model year, those next-generation models supposedly to be engineered with a lot more aluminum.