2014 Gmc Terrain Slt-1 on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GMC introduces off-road performance package for Sierra AT4

GMC is giving its off-road-focused Sierra AT4 pickup even more performance with some factory-installed upgrades. The package is called the AT4 Off-Road Performance Package. With it you'll get the 6.2-liter V8 engine upgrade, cat-back performance exhaust system, performance air intake and 18-inch aluminum wheels shod in Goodyear Wrangler DuraTrac tires. The upgraded performance comes in the form of extra power. Thanks to the bolt-ons, you gain 15 horsepower and 9 pound-feet of torque over the 6.2-liter in stock form. This increases output to 435 horsepower and 469 pound-feet of torque — not too shabby. This package is priced at $4,940, and available for order now. That's a hefty price for what amounts to some minimal bolt-on modifications you could easily do yourself. However, buying it through GM means you get to keep your warranty in place. The Sierra AT4 already has more off-road features than a normal Sierra 1500. You're getting a two-inch lift, four-wheel drive with two-speed transfer case, locking rear differentials, skid plates, Rancho off-road shocks and hill descent control. Both the wheels and tires are available as options already, but this package just bunches related stuff together. It'll be up to you to decide if an exhaust and intake are worth the extra dough. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM warning 800,000 owners that their cars may need oil changes more frequently than they say

The days of changing your engine oil every 3,000 miles are long gone thanks to most cars having automatic oil monitoring systems, but about 800,000 General Motors vehicles apparently have incorrect monitoring software that is leading to premature engine component wear. According to Autoweek, certain 2010-2012 Buick LaCrosse, Regal, Chevrolet Equinox and GMC Terrain models equipped with 2.4-liter four-cylinder engines could be going too long in between oil changes resulting in a higher-than-normal number of warranty claims for the engine's balance chain. The balance chain links the balance shaft to the crankshaft, and a worn one can produce higher noise levels.
As a fix, GM dealers will be reprogramming the software for the monitors in an effort to reduce the interval between oil changes, which varies based on driving habits and conditions. Through February 2015, the software update will be done at no cost to vehicle owners, but since this is not a recall, after that point, it will be up to the discretion of dealers as to whether or not they will charge for the service. What isn't immediately clear is whether GM plans on giving assistance to out-of-warranty customers who are experiencing engine issues from the worn chain.