2013 Denali Awd Navigation Leather 19s Satin Chrome Lifetime Warranty on 2040-cars

Auto blog

GMC teases Hummer EV's removable roof panels

Today was supposed to be the day that GM took the wraps off its GMC Hummer EV. We were told as much during the Super Bowl commercial, but GM revised it to an undecided future date, citing the coronavirus as the reason. Instead of the big reveal, we have a teaser.  The Hummer EV is going to feature removable roof panels, and now we get a better look at them. There are four roof panels and a front T-bar that come out of the truck. You can see what that looks like in the video at the top of this post. Comparisons to Jeep are obvious as the open-air experience is likely similar to the Gladiator and Wrangler with their hardtop roof panels removed. That zero-limits slogan makes a bit of sense from this respect. With the sheer number of roof panels, we suspect a single person will be able to remove them alone. In addition to the video of the roof, we get a small peek at the massive digital screens the Hummer will be sporting. Check them out at the bottom of the photo below. They appear to be two large slabs, separate from each other. Other details are scarce on the ground. We’re not sure when the Hummer will make its grand entrance at this point, but are still excited to see the 1,000-horsepower truck hit the road. GMC is still advertising the 0-60 mph time of just 3 seconds, too. The latest tidbit of news suggests that further teasers might be coming, so we could be in for a rather drawn out reveal process. Our senior green editor John Snyder got to see the GMC Hummer in person earlier this year at GMÂ’s EV Day and described it like this: “ItÂ’s a big, off-road-ready pickup complete with giant all-terrain rubber and tow hooks. It features removable roof panels for access to the open sky, which appears to be depicted in the teaser above. It features sail panels behind the C-pillars, similar to those on the Chevy Avalanche and Honda Ridgeline. Its bed was concealed with a tonneau cover, but it sported GMCÂ’s MultiPro tailgate that we first saw on the Sierra Denali. Interior photos showed a spacious interior with blocky shapes, squared hourglass vents that mirror the look of the taillights and a lunar theme that incorporates the topography of the Sea of Tranquility into things like the floor mats and speaker covers. It also has a large infotainment screen as well as a digital instrument panel.” Related video:

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

2018 GMC Terrain loses the V6 and gains a diesel for an all-turbo lineup

You may have noticed that compact crossovers are kind of a big deal these days. After eight years on sale, GMC is finally getting a new version of its littlest ute, the Terrain, for 2018. And it can't arrive a moment too soon. The 2018 GMC Terrain made its debut tonight on the eve of the 2017 Detroit Auto Show. The 2018 Terrain looks to be completely new, and is now built on GM's D2XX platform. It again shares a platform and major components with the Chevrolet Equinox; like the 2018 Equinox, the Terrain will offer three engines, including two turbocharged gas four-cylinders and a turbodiesel four. The base 1.5-liter gas four makes 170 horsepower and 203 pound-feet of torque, while the 2.0-liter inline-four puts out 252 hp and 262 lb-ft. (The 2.0 basically takes the place of the 3.6-liter V6 offered in the outgoing Terrain.) GM's 1.6-liter diesel four will also be available, making 137 hp and 240 lb-ft of torque in this application. Both gas engines will be paired with nine-speed automatic transmissions, while the diesel gets a six-speed auto. No fuel-economy claims have been made, but we expect the new models to outdo the current versions, with the diesel reaching around 40 mpg on the EPA highway cycle. View 14 Photos The new Terrain's design is equally fresh and does a good job of differentiating it from the related Equinox, with details very reminiscent of the new GMC Acadia. The lighting elements are even more intricate here, with LEDs used for the daytime running lights and taillamps. GMC designers gave it the floating-roof look, which is successful aside from the odd placement of a trim badge at the base of the D-pillar. Terrains will again be available in SL, SLE, SLT, and range-topping Denali trim, with the latter featuring the signature satin chrome grille, chrome accents, and monochrome paint scheme GMC uses on all of its top-trim models. The interior sees an upgrade in materials and a more-thoughtful layout, with a new version of GM's Electronic Precision Shift gear selector using buttons and switches instead of a lever to open up more space on the center console. Both front- and all-wheel-drive models get a Traction Select system that will tune the shift points and throttle points for specific driving conditions via a knob at the rear of the console. On models equipped with all-wheel drive, a front-drive mode disconnects the rear axle to improve fuel economy.