2006 Gmc Sierra 3500 Slt Automatic 4-door Truck on 2040-cars

Auto blog

2017 GMC Acadia loses 700 pounds, gains everywhere else

Ladies and gentlemen, welcome to Acadia. The 2017 version of the three-row GMC crossover has all kinds of newness. The 2017 Acadia has lost 700 pounds compared to its predecessor thanks to high-strength steels allowing redesigned parts, and the fact that it overall, the vehicle is actually smaller. Length is reduced by 7.2 inches on a wheelbase diminished by 6.4 inches, it is 3.5 inches narrower and sits 3.9 inches lower. The 2016 Acadia was 4,656 pounds, the 2017 is 3,956 pounds. GMC says it will still swallow people, but not as many: the eight-passenger option didn't make the transition, potential three-row trims permitting five-, six-, and seven-passenger configurations. While you lose space, you gain convenience with a split-folding second row featuring tilt-and-slide for both sections. The third-row seats fold flat into the cargo floor, and if the second row is folded as well, cargo capacity improves over the 2016 Acadia, 79 cubic feet compared to 70 cu-ft. A new 2.5-liter four-cylinder brings a second engine option to the spec sheet, returning an estimated 22 city miles per gallon and 28 highway mpg with the help of stop/start tech on front-wheel-drive trims. The new 3.6-liter V6 gets around 310 horsepower, a power bump of about 19 hp, and an estimated 25 highway mpg in front-wheel-drive guise. Towing capacity for that V6 goes down, though, from 5,200 on the current Acadia to an estimated 4,000 pounds. The optional Tow Vision Trailering system will make that pulling easier. Both engines are hooked to a six-speed automatic. Now we can get to its looks. Trademarks like the square, flared wheel arches, dark D-pillars, and wraparound rear side windows made the transition, everything else is new. While weight has gone down, safety's gone way up with internal changes like the splayed chassis members to confront the small-offset test. New active safety upgrades run from from three kinds of automatic braking systems to surround vision cameras, automatic high beam control, a safety alert seat, and a following distance indicator. Buyers can choose from a front-wheel drive, all-wheel drive, or All Terrain model, each with its own electronic drive selector modes. The Normal, Sport, and Trailer/Tow modes are common to the trio. The FWD gets a Snow mode, the AWD adds adaptive 4x4 and Off Road modes; on the AWD, the 2x4 mode disconnects the rear axle from the drivetrain.

2020 GMC Sierra HD offers loads of tech

The 2020 GMC Sierra HD has finally been revealed, and it's a heck of a lot more subtle than the Silverado HD. Whereas the Chevy went with a wildly exaggerated version of the split grille and headlights the truck is known for, the Sierra simply builds on the 1500 model's design with an expanded grille that doesn't appear to be as tall or wide as the Chevy's. That's not to say it looks unimpressive, though. It's still got a massive fascia, it's just not as extreme as the one with a bowtie on it. With the Sierra's unveiling, we get more details about the powertrains available on the heavy duty GM trucks. The 6.6-liter turbocharged Duramax V8 makes 445 horsepower and 910 pound-feet of torque. That's the exact same output as the engine in the old models. But this time, the engine will be mated to an Allison-branded heavy duty version of the GM 10-speed transmission. A gas engine will also be available, but GMC hasn't revealed details on it yet. The new Sierra boasts a range of new features, some that are unique to it, and some shared with the Silverado. A shared feature is the new steps in the bed sides that are standard on all Sierra HD models. Unique to the brand is the MultiPro tailgate with fancy drop-out step. This tailgate will be available on all trims, and it's standard starting with the mid-level SLT. There are some useful visibility features being shown on the new Sierra, too, such as an available trailer camera system with 15 possible viewpoints, and it can virtually show the rear view on the screen as if there wasn't a trailer in the way. GM's rear-view mirror screen also makes an appearance. An AT4 off-road trim will be available on the new Sierra HD. It has slightly different styling with dark grilles and trim. Off-road upgrades include reworked springs and shocks, skid plates, standard all-terrain tires and a locking rear differential. Pricing has not yet been announced, but the truck goes on sale this summer. Details on prices as well as further specifications will likely be announced near the on-sale date. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.