2006 Gmc Sierra 2500 Hd Sl Standard Cab Pickup 2-door 6.0l on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]

UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.

Car theft skyrockets thanks to rising parts prices

Cars and trucks today have achieved a high level of average quality, with safety and technology features that keep occupants safer than ever and meet consumers' high expectations. But the National Insurance Crime Bureau finds that those components come with a rising price tag, leading to expensive repair bills — and rising vehicle thefts to support a thriving black market for parts. The nonprofit NICB said it looked at the cost of replacement parts for the top 10 stolen 2016 models, with average OEM part prices pulled from a database of more than 24 million vehicle damage appraisals generated for 2016 and 2017 insurance claims. The list did not include major components like engines or transmissions, only easily-stripped components like bumpers, doors, hoods and headlights. It found that: The 2016 Toyota Camry, which had a used market value of around $15,000, had 15 commonly replaced parts that added up to almost $11,000, not including labor, with quarter panels alone costing almost $1,600 a pair and a set of alloy wheels tallying more than $1,600. The Camry was also the top stolen vehicle in 2016 at 1,113 thefts. A 2016 Nissan Altima had 14 standard parts worth more than $14,000, including a single headlamp assembly that costs just over $1,000. The Altima was the second-top stolen vehicle in 2016 at 1,063 vehicles stolen. And the 2016 GMC Sierra pickup, which was No. 7 on the 2016 top-stolen list, rang up $21,000 from 20 standard components, including an $1,100 headlamp assembly and an $1,100 rear bumper. "For the professional theft ring, stealing and stripping vehicles for parts has always been a lucrative business," Jim Schweitzer, NICB's senior vice president and chief operating officer, said in a statement. "On today's cars and trucks, the parts are often worth more than the intact vehicle and may be easier to move and sell. That's why we see so many thefts of key items like wheels and tires and tailgates ... there's always a market for them." Check out the NICB infographic below. Vehicle thefts in the U.S. rose by more than 4 percent in 2017, based on preliminary FBI data, after rising 7.6 percent in 2016, though the overall trend has been down since vehicle thefts peaked in 1991, according to the NICB. Related Video: Image Credit: National Insurance Crime Bureau Aftermarket GMC Nissan Toyota Auto Repair Insurance Ownership auto parts car values stolen car nicb national insurance crime bureau components