2003 Gmc Sierra 2500 on 2040-cars

Auto blog

2019 GMC Sierra spied sporting just a thin wrapping

A new Chevy Silverado is on the way, and along with that comes it's fraternal twin, the GMC Sierra. We've seen spy shots before, but, like the Silverado we saw a few days ago, this is our best look yet. Nearly all of the loose-fitting camouflage has been removed, giving us a decent view of the bodywork. A brief look shows that the Sierra and Silverado will have significant styling differences for this generation. In the past, GMC trucks have been little more than rebadged Chevrolets. That's been changing in recent years, and the divide seems to be growing larger. The grille looks much larger than the Silverado's and there appears to be a small inlet right where the hood meets the front. From the side, we can see that the two trucks have different fenders and beds. The wheel wells on the GMC are squared off at the rear. Compare that to the round wells on the Chevy. Out back, the design is far more similar. Both trucks appear to have rear-facing exhaust outlets. The taillights, too, look to have close to the same shape. A big bulge in the center of the tailgate likely hides a large GMC badge. We still don't have a firm reveal date, but look for some further news this auto show season. Related Video:

GM recalling 686k Lambda-platform models for hatch repair

General Motors is recalling 686,287 units of its Lambda platform crossovers. On models equipped with a power rear hatch the system can potentially fail. This campaign includes the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, and 2007-2010 Saturn Outlook. According to GM's documents to the National Highway Traffic Safety Administration (as a PDF), dirt can get into a portion of the strut that holds up the hatch and cause the part to prematurely fail. There's a redundancy in place called the Prop Rod Recovery system that's designed to shut the liftgate if there's a malfunction. However, if the breakdown happens too quickly after the hatch is opened the prop rod might not work the way it's supposed to. If someone were in the way of the falling liftgate, they could be hurt. For the repair, dealers will update the software for the power liftgate actuator motor control unit to prevent the hatch from closing so quickly. They'll also check the operation of the system afterward. Related Video: RECALL Subject : Liftgate Struts may Fail and Liftgate may Fall Report Receipt Date: JUN 30, 2015 NHTSA Campaign Number: 15V415000 Component(s): STRUCTURE Potential Number of Units Affected: 686,287 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2008-2012 CHEVROLET TRAVERSE 2009-2012 GMC ACADIA 2007-2012 SATURN OUTLOOK 2007-2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. CONSEQUENCE: If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The manufacturer has not yet provided a notification schedule.

GM Design shows another early Hummer EV sketch

Like a new mother who's still so excited about her one-year-old baby that she can't stop showing ultrasound photos, General Motors is so excited about its biggest new baby, the battery-electric GMC Hummer, that it can't stop showing off development design sketches. The off-road monster with the 200-kWh Ultium battery pack debuted online on October 21 last year. The next day, the GM Design Instagram page posted some of the Hummer's early "theme sketches" leading to the production version. These had a conceptual flair to them, but were rather restrained. A month later, GM uncovered a series of development renderings showing off a much wilder truck bursting with more angles than a geometry text book. The archives have opened up again with a new "ideation sketch," this one between the first believable sketches and the second truck that Master Chief and Doomguy share on their days off.  All three sets of drawings show similar three-box proportions, it's the details that got a ton of love. On this newest sketch, the fenders flare a touch more than on the production truck, but the wheel wells are cut with the kind of clearance found on a Baja 1000 Trophy Truck. Out back, save for the tow hooks, the rear end is totally different than production. The sketch puts illuminated Hummer script across a narrow tailgate flanked by small square, taillights housing six individual elements. Beneath that, a bumper-less rear end puts nothing more than a sloped bash pate between the truck and the rocks it's just scrambled over. To our eyes, this is the best blend of production-ready comfort from the first sketches and zoot suit angles from the second that we've seen so far.  First deliveries of the GMC Hummer EV Edition 1 are expected before the year is out. When we get a chance to absorb the truck in its native habitats, we'll know whether there's cause for disappointment at what could have been. If so, with all this hunger among the monied for something different, we feel like restomodders have been given the perfect head starts on custom rebodied Hummers that would make things right. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.