2014 Gmc Sierra 1500 Sle on 2040-cars

Auto blog

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.

GMC Hummer EV revealed as a 1,000-hp, 350-mile, fast-charging beast

The 2022 GMC Hummer EV has finally been revealed, and it certainly looks the part. It has chunky, squared-off styling, big tires pushed to the edges, and a towering fascia. But it’s not a case of form over function. On the contrary, the Hummer EV is has some pretty wicked technology and gear under the skin. The first version of the Hummer EV that will be available is the tricked-out Edition 1. It features three electric motors, which allows for torque vectoring. These motors make 1,000 horsepower, though GMC still hasnÂ’t given real-world torque numbers. The motors are fed by a 24-module Ultium battery pack. The pack can provide an estimated 350 miles or more of range. Not only that, but it supports 800-volt fast charging up to 350 kW. ThatÂ’s comparable to PorscheÂ’s charging system, and GMC says it can add an extra 100 miles of range in just 10 minutes. Later, a two-motor Hummer EV and a three-motor version without torque vectoring. The Hummer EV rides on fully independent suspension with adaptive air shocks. They can provide continuous damping adjustments for comfort, and have a height adjustment range of 6 inches. When set in its max-height off-road mode, it has two additional inches of ground clearance, and the "Extract Mode" will lift it six inches higher than default. The Edition 1 model also comes with standard 35-inch mud terrain tires, and combined with the suspension, the Hummer EV has a fording depth of 2 feet and the capability to climb over an 18-inch vertical obstacle. Owners will be able to easily add more clearance since GMC made the wheel arches large enough to accommodate aftermarket 37-inch tires. Additional off-road goodies include skid plates along the chassis, rock sliders, the previously covered four-wheel steering with Crab Mode diagonal driving, and 18 camera views including angles under the truck for getting over rocks. Those cameras feature sprayers, too to keep them clean. Detailed information on torque output, torque vectoring, tire pressure, vehicle angles and more are also displayed on the infotainment screen. Speaking of that infotainment screen, itÂ’s a massive 13.4 inches and is paired with a 12.3-inch instrument display. They feature proudly in a squared-off, rugged-looking interior. The Hummer EV will get the latest version of Super Cruise, complete with automatic lane-changing. The Edition 1 gets the removable roof panels as standard, and those roof panels are clear, so you can still get some sun with them in place.