1986 Chevrolet Chevy Gmc Sierra Classic 1500 Short Bed Truck on 2040-cars

Auto blog

2018 GMC Terrain loses the V6 and gains a diesel for an all-turbo lineup

You may have noticed that compact crossovers are kind of a big deal these days. After eight years on sale, GMC is finally getting a new version of its littlest ute, the Terrain, for 2018. And it can't arrive a moment too soon. The 2018 GMC Terrain made its debut tonight on the eve of the 2017 Detroit Auto Show. The 2018 Terrain looks to be completely new, and is now built on GM's D2XX platform. It again shares a platform and major components with the Chevrolet Equinox; like the 2018 Equinox, the Terrain will offer three engines, including two turbocharged gas four-cylinders and a turbodiesel four. The base 1.5-liter gas four makes 170 horsepower and 203 pound-feet of torque, while the 2.0-liter inline-four puts out 252 hp and 262 lb-ft. (The 2.0 basically takes the place of the 3.6-liter V6 offered in the outgoing Terrain.) GM's 1.6-liter diesel four will also be available, making 137 hp and 240 lb-ft of torque in this application. Both gas engines will be paired with nine-speed automatic transmissions, while the diesel gets a six-speed auto. No fuel-economy claims have been made, but we expect the new models to outdo the current versions, with the diesel reaching around 40 mpg on the EPA highway cycle. View 14 Photos The new Terrain's design is equally fresh and does a good job of differentiating it from the related Equinox, with details very reminiscent of the new GMC Acadia. The lighting elements are even more intricate here, with LEDs used for the daytime running lights and taillamps. GMC designers gave it the floating-roof look, which is successful aside from the odd placement of a trim badge at the base of the D-pillar. Terrains will again be available in SL, SLE, SLT, and range-topping Denali trim, with the latter featuring the signature satin chrome grille, chrome accents, and monochrome paint scheme GMC uses on all of its top-trim models. The interior sees an upgrade in materials and a more-thoughtful layout, with a new version of GM's Electronic Precision Shift gear selector using buttons and switches instead of a lever to open up more space on the center console. Both front- and all-wheel-drive models get a Traction Select system that will tune the shift points and throttle points for specific driving conditions via a knob at the rear of the console. On models equipped with all-wheel drive, a front-drive mode disconnects the rear axle to improve fuel economy.

Huge, pricey trucks haul jobs and profits for the Detroit Three

DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.

Could the GMC Jimmy come back as a Wrangler fighter?

Every three or four years, two cars go into heavy media rotation in stories about supposed new competitors. The headlines go something like, "X automaker working on a vehicle to fight the iconic Y." The Y cars are the Porsche 911 and the Jeep Wrangler. For this story, the X automaker is GM. And since GM already has its 911-fighter poised for debut next month, we speak here of the Wrangler. Car and Driver writes that GMC might take another shot at a Jeep challenger, this time by rebirthing a body-on-frame Jimmy SUV. For any who don't know, GMC sold an S-15 Jimmy from 1982 to 2005, a twin of the Chevrolet S-10 Blazer. Those SUVs started their lives as the Chevrolet S-10 and GMC S-15/Sonoma pickups. The Blazer name has returned to the light, albeit without its old-school rugged manners. There's still an opening on the GMC side, though, so C/D says the idea would be to work that old magic on the GMC Canyon pickup. The report is more chaff than grist for the rumormill, with liberal application of phrases like "looking to come up with," "could be," "could take," and "could arrive." Having said that, a potential Jimmy model could come in a few years, could use the same six-cylinder gas and four-cylinder diesel engines as the Canyon, and could start around $30,000. The Jimmy could wear GMC's new mud-and-guts AT4 trim name, or become a mud-and-guts trim for the Canyon just as the ZR2 is for the Colorado. It's not an entirely crazy idea, however, when a body-on-frame Trailblazer SUV based on the Colorado sells in Latin America, Asia, and Australia and does pretty well in the mud and muck. GM's been on the edge of going to war with the Wrangler for at least 12 years, when a Hummer exec said the HX concept would debut at the 2008 Detroit Auto Show and go on sale in 2010 as the H4. In 2015, The Wall Street Journal said GM was canvassing GMC dealers about something to get in the ring with the Wrangler. And all that was before every other automaker had to watch Jeep open a money-counting operation to handle its Wrangler profits, and dealers started charging $20,000 markups on Gladiators. In May, spy shooters caught a sensor-laden Jeep running at GM's Milford Proving Grounds in Michigan. Earlier this month, Bloomberg reported GM is considering a Hummer revival as an all-electric hardcore SUV. So we will not be surprised if GM rolls out a Wrangler fighter in the near-ish future. But we won't be surprised if GM doesn't, either.