2013 Gmc Savana Passenger 6.0l Two-wheel Drive on 2040-cars

Auto blog

2020 GMC Sierra HD pricing announced

Just as with its Chevy twin, pricing for the 2020 GMC Sierra HD has been revealed. Unlike the Chevy, though, prices haven't dropped across the board. The ultimate base prices for the 2500 HD and 3500 HD are technically less than the 2019 models at $37,195 and $38,395 respectively, but that's because those are the reintroduced regular cab models. Matching up the body styles of the last year's cheapest Sierras with their new equivalents, and the prices have crept up a few hundred dollars. But the next highest trim level, SLE, drops in price by nearly $2,000 between equivalent trucks. Equivalent SLT trucks are up nearly $2,000 each, though, and the base Denalis have gone up by about $7,000. This is due in part to the 2020 Sierra Denali no longer being offered with two-wheel drive. Comparing the old and new four-wheel drive models, the price is still up by about $4,000. While the new Sierra HD is only more affordable than the last one in certain circumstances, they all feature more capability. The standard 6.0-liter gas-powered V8 makes an extra 41 horsepower and 84 pound-feet of torque than the old one for a total of 401 horsepower and 464 pound-feet of torque. The 6.6-liter diesel V8 still makes 445 horsepower and 910 pound-feet of torque, but it now gets a 10-speed automatic transmission. Maximum fifth-wheel towing has increased, too. For the 2500, that number jumps from 15,400 pounds to 18,500 in the new model. For the 3500, fifth-wheel towing goes from 23,100 pounds to 35,500 pounds for the new truck. And of course, you can get GMC's fancy MultiPro tailgate on the new Sierra HD. One final note on the Sierra HD's pricing: it has the highest base price of the full-size heavy duty trucks. The Ford F-250 Super Duty is the cheapest at $34,745 and is closely followed by the Ram 2500 at $35,090. The full range of GMC Sierra HD pricing is listed below: Sierra 2500 HD Regular Cab Sierra: $37,195 SLE: $41,595 Double Cab Sierra: $39,795 SLE: $43,595 SLT: $52,195 Crew Cab Sierra: $41,595 SLE: $45,395 SLT: $53,995 AT4: $59,295 Denali: $65,295 Sierra 3500 HD Regular Cab Sierra: $38,395 SLE: $42,795 Double Cab Sierra: $41,195 SLE: $44,995 Crew Cab Sierra: $42,795 SLE: $46,595 SLT: $55,195 AT4: $60,495 Denali: $66,495 Update: The estimation of price difference between 2019 and 2020 Sierra Denalis has been corrected. Additional clarification of Denali price changes has also been added.

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado

Surprise! GM putting aluminum in next-gen pickups

Last month, General Motors launched a series of ads touting the benefits of steel over aluminum – specifically, with regard to the Chevy Silverado versus the Ford F-150. (Kind of. We're not sure what a grizzly bear has to do with anything.) We took issue with the ads, with editor in chief Mike Austin saying they "reek of insecurity, and distract from the Silverado's strengths that could be used for positive advertising." But what bothers us more, is that yet another report surfaced claiming anti-aluminum GM will indeed use the weight-saving material in its next-generation fullsize trucks. On Tuesday, GM announced a $877-million investment for its truck plant in Flint, MI. But Reuters says that huge overhaul is because the trucks will use "substantially different equipment than the tools GM uses today." The report specifically states, "People familiar with the company's plans say GM's next-generation pickups and SUVs will make use of various materials, including aluminum and lightweight steel, to shed weight and gain fuel efficiency to meet tougher federal standards." The Silverado already uses a few aluminum components in the engine and hood, and if more widespread use will help GM build its best fullsize trucks ever, then that's great. Honestly, we have no reason to doubt that aluminum will be used in the next Silverado and GMC Sierra. We just hope GM remembers that nothing is ever truly deleted from the bowels of the Internet when it launches the subsequent "look how great aluminum is!" campaign. Related Video: News Source: Reuters Green Plants/Manufacturing Chevrolet GM GMC Truck aluminum steel