2004 Gmc Savana Conversion Van Awd Very Rare La West Every Option We Finance! on 2040-cars

Auto blog

2024 GMC Hummer EV 3X Pickup gets a range boost

The 2024 GMC Hummer EV 3X Pickup is getting an update for more range in the new model year. Instead of 355 miles, the new long-range version of the 3X Pickup will go 381 miles. Note that you need to option the 24-module battery pack to get this range figure. However, if you go for the standard 20-module battery pack, GMC says range is improved for 2024, as well. The GM-estimated figure goes from 329 miles for 2023, all the way up to 359 miles for 2024. You should also note that acceleration times are different depending on battery pack, too, as the longer-range model does 0-60 mph in 3.0 seconds versus the 3.5 seconds of the standard range version. The other big choice you’ll need to make is whether or not you tack on the “Extreme Off-Road Package.” This adds 18-inch wheels wrapped by 35-inch mud-terrain tires, four addiitonal underbody camera views for a total of 18, front e-locker with rear virtual locking differentials, heavy-duty ball-spline half-shafts along with more skid plates and underbody shielding. WeÂ’ll also note that range suffers as a result of this equipment. GM only provides the range figure for the upgrade 24-module pack, and it goes down from 381 miles to 359 miles. GMC says the 2024 Hummer 3X Pickup will go on sale to reservation holders this fall and start at $106,945, including the destination charge. Related video:

GMC Hummer pickup and SUV previewed in video, set to be revealed in fall

GMC has just provided us with our first good look at the upcoming Hummer EV pickup and SUV. A video was posted online previewing the two models that also happens to feature LeBron James. From clay sculptures to prototypes in various levels of completeness, GM is allowing the world a sneak preview of what’s to come. A couple of the more revealing images come in silhouette photos of both the truck and SUV at the end of the video. The truck has a big four-door crew cab and an exceptionally small bed behind it. The angle from cab to bed is also notable. ItÂ’s not easy to see exactly whatÂ’s going on since itÂ’s shrouded in darkness, but when we saw the Hummer pickup, it was rocking sail panels that resemble the ones on the truck weÂ’re looking at. The truckÂ’s general shape is off-road oriented with squared-off, sharp lines tracing the entire silhouette. Its big, knobby tires and blocky wheels are clear indicators of what GM was aiming for with this electric pickup. As for the SUV, comparisons to the Ford Bronco four-door will be inevitable. If our eyes are picking up the scale of this photo correctly, though, the Hummer SUV appears to be a slightly larger vehicle than the four-door Bronco is. Although, the wheelbase for the SUV is shorter than that of the Hummer truck. ThatÂ’ll help it off-road. Those small bumpers and short overhangs along with the bumper cutouts should be hugely beneficial to approach and departure angles, as well. Hummer EV prototype View 6 Photos GMCÂ’s shots of the Hummer in the studio are equally as revealing. We can see what looks to be an intense front skid plate and two big tow hooks. In addition to the off-road gear, GMC has allowed a look at the frunk. The front “grille” is one piece with the hood of the truck, so the whole assembly pulls up. That makes for what appears to be a very easy-to-load front trunk compared to other EVs that force you to lift items up and over the front of the car. The whole removable roof assembly is exposed in this video, too. We can see the crossbars that the removable panels attach to and also what the truck looks like with the tops removed. The SUV appeared to have removable roof panels from our short glimpse of it in a studio awhile back. Other new details GM mentioned in the video include Adrenaline Mode, Crab Mode and Next-Gen Super Cruise. We donÂ’t know what Adrenaline Mode or Crab Mode do yet, but theyÂ’re certainly off-road modes that GM has designed specifically for this electric Hummer.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.