Great Construction Van Or Hunting Van on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2018 GMC Sierra Denali can help you tow without breaking a sweat

Towing a trailer once meant that only those who possessed certain knowledge would be able to go fishing, tow a race car or pull a camper safely. For me, it took four long years of practice working a job behind the wheel of a jacked-up Ford F-250, hauling tons upon tons of mowing equipment for my local parks department, to become proficient. Just how far things have come since then became evident after a recent trip to Utah with GMC, in which we used the half-ton Sierra Denali to tow a set of Polaris side-by-sides through the state. Modern safety technology and a suite of electronic aids make towing simple enough that anyone with a driver's license and something to haul can do it. This revelation came behind the leather-wrapped and heated steering wheel of GMC's outgoing 2018 Sierra Denali. Sitting in the plush, heated and cooled captain's chair, I could barely feel the 6,000 pounds I was towing behind me. Even GMC's smallest full-size truck engine, a 5.3-liter V8 generating 355 horsepower and 383 lb-ft of torque, felt like overkill for what used to amount to a heavy load. With Utah's pristine landscape, the plush confines of the cabin and the uneventful nature of modern towing, mile after mile just streamed by at highway speeds without incident (or excitement). When we finally reached our destination a few hours later, one of GMC's representatives who had chosen to sit in the rear of the cab asked me what I thought about the drive. I pondered for a few minutes and answered with this: "Modern pickup trucks have removed nearly every skill-based variable once associated with towing. I could drive this truck and trailer confidently with just one finger." Consider the near overabundance of towing-assistance systems in the GMC Sierra Denali that I piloted through Utah. Let's start with the most basic of towing skills — something that's now been relegated to the annals of history: reversing a pickup to meet the trailer's hitch. Once upon a time, this required knowing a truck's dimensions and understanding proximity, as well as having a keen eye, a steady foot for both the gas and the brake and the patience to get it right. Now, though, pickups such as the Sierra Denali offer customers a trailer reverse camera system that helps the driver align truck to hitch with pinpoint accuracy.

Pics Aplenty: Meet the 2014 Chevrolet Silverado and GMC Sierra [w/poll]

Today was a pretty big day for General Motors, debuting the all-new Chevrolet Silverado and GMC Sierra light-duty pickup trucks ahead of their official showcase at the 2013 Detroit Auto Show. And now that the dust has settled at GM's big reveal event, we've had a chance to snap dozens of photos of the new pickup pair from every angle.
We already told you the important bits earlier today (click here in case you missed it), but let's recap. Under the hood are three new engines - a 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 (you know, a version of the small-block that'll also be found under the hood of the C7 Corvette), all mated to six-speed automatic transmissions. The 2014 model year marks the return of the Z71 off-road package with Rancho shocks, front tow hooks and beefier underbody protection. Inside, there's a host of new technology and a greater focus on better quality and refinement.
Some of the nitty-gritty specifics (like engine output numbers and fuel economy) have yet to be revealed, and since we haven't driven the finished products yet, it's hard to say how these trucks will fare against rivals like the Ram 1500 and Ford F-150. For now, we can only judge these two books by their covers, and while we do like the designs of the new trucks, we Autoblog staffers are torn on exactly which one looks best.