1984 Full Size Gmc Jimmy Blazer Sierra Classic 4x4 Chevy on 2040-cars

Auto blog

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

2022 Hummer EV Edition 1 pickups ready to go to customers

It's official: Two years after GM announced the electric GMC Hummer pickup, the first couple dozen units have left the line at the GM Factory Zero Detroit-Hamtramck Assembly Center, according to GM president Mark Reuss. In an interview with CNBC to celebrate the milestone, Reuss said 17 Hummer EVs are ready for delivery to customers. This makes the Hummer the first of GM's new Ultium-based EVs to leave the factory, and the second electric pickup on the market after the Rivian R1T. The first 1,200 Hummer EVs made will be Edition 1 models, all of which are Interstellar White outside with Lunar Horizon interiors and bronze badging. Each of the $112,595 pickups is powered by three Ultium motors producing a GM-estimated 1,000 horsepower and 11,500 pound-feet of torque, loaded with features like height-adjusting adaptive suspension, skid rails and rock sliders, 35-inch tires, the diagonal-driving CrabWalk, the launch control system Watts to Freedom that unlocks a three-second sprint to 60 miles per hour, and Super Cruise. Range is a GM-estimated 329 miles when the 200-kWh battery is fully charged. As these filter out to eager owners, GM is prepping the next four phases of the Hummer rollout. About a year from now, in autumn of 2022, Factory Zero will begin production of the first widely available Hummer, the EV3X pickup that starts at $99,995 before destination. Three Ultium motors will provide an estimated 800 horsepower and 9,500 pound-feet of torque to a range estimated beyond 300 miles. Spring of 2023 is expected to deliver the Hummer EV2X pickup at an MSRP of $89,995, utilizing two motors producing a total 625 hp and 7,400 lb-ft over a range also estimated to go beyond 300 miles. Around the same time, the first units of the $105,595 Hummer SUV Edition 1 are planned to head down lines at Factory Zero. Finally, in the spring of 2024, the entry-level $79,995 Hummer EV2 pickup and its two-motor powertrain should arrive, making the same output as the EV2X, but only good for a range of around 250 miles. That won't be all we see from Factory Zero, either. GM invested $2.2 billion in the Detroit-Hamtramck plant that once built bread-and-butter GM fare like the Chevrolet Impala, Buick LaCrosse, and Oldsmobile Toronado in order to turn the facility into its first EV base of manufacturing operations for Ultium products. The battery-electric Chevrolet Silverado and GMC Sierra pickups will be built there, as will the Cruise Origin robotaxi.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.