2004 Gmc Envoy Gold Gray on 2040-cars

Auto blog

No carbon fiber was harmed in the making of new 2015 GMC Sierra Carbon Edition

Carbon fiber is known for its properties of combining amazing strength with extremely low weight, and its frequent use in high performance vehicles gives the material a somewhat aggressive air. GMC is hoping to play on some of that mean reputation with its upcoming trio of Sierra Carbon Editions. However, despite their name, there's no actual carbon making its way onto these trucks (at least in the form of CF). Instead, the special edition is a graphics package with some extra equipment thrown in.
All three specials are based on the 2015 Sierra 1500 and can be ordered in two- or four-wheel drive configuration and with the standard 4.3-liter V6 or optional 5.3-liter V8. Things kick off with the standard Sierra Carbon Edition for $33,075, including destination, available only on the double cab body. Buyers get a black grille, carbon fiber decals on the hood and tailgate and body color trim for the door handles and mirror caps. The edition also adds keyless entry, a 110-volt outlet and LED cargo box lighting.
Buyers wanting just a touch more style can opt for the Carbon 20 Edition on the SLE double cab that gets the same exterior tweaks, plus 20-inch aluminum wheels, and retails for $38,275. Finally, there is the Carbon 22 Edition starting at $42,270 on the SLE in double- or crew cab models. It adds further black 22-inch wheels, tubular side steps, fog lights, keyless start, a universal home remote, dual-zone climate control and 110-volt outlet.

2017 GMC Acadia loses 700 pounds, gains everywhere else

Ladies and gentlemen, welcome to Acadia. The 2017 version of the three-row GMC crossover has all kinds of newness. The 2017 Acadia has lost 700 pounds compared to its predecessor thanks to high-strength steels allowing redesigned parts, and the fact that it overall, the vehicle is actually smaller. Length is reduced by 7.2 inches on a wheelbase diminished by 6.4 inches, it is 3.5 inches narrower and sits 3.9 inches lower. The 2016 Acadia was 4,656 pounds, the 2017 is 3,956 pounds. GMC says it will still swallow people, but not as many: the eight-passenger option didn't make the transition, potential three-row trims permitting five-, six-, and seven-passenger configurations. While you lose space, you gain convenience with a split-folding second row featuring tilt-and-slide for both sections. The third-row seats fold flat into the cargo floor, and if the second row is folded as well, cargo capacity improves over the 2016 Acadia, 79 cubic feet compared to 70 cu-ft. A new 2.5-liter four-cylinder brings a second engine option to the spec sheet, returning an estimated 22 city miles per gallon and 28 highway mpg with the help of stop/start tech on front-wheel-drive trims. The new 3.6-liter V6 gets around 310 horsepower, a power bump of about 19 hp, and an estimated 25 highway mpg in front-wheel-drive guise. Towing capacity for that V6 goes down, though, from 5,200 on the current Acadia to an estimated 4,000 pounds. The optional Tow Vision Trailering system will make that pulling easier. Both engines are hooked to a six-speed automatic. Now we can get to its looks. Trademarks like the square, flared wheel arches, dark D-pillars, and wraparound rear side windows made the transition, everything else is new. While weight has gone down, safety's gone way up with internal changes like the splayed chassis members to confront the small-offset test. New active safety upgrades run from from three kinds of automatic braking systems to surround vision cameras, automatic high beam control, a safety alert seat, and a following distance indicator. Buyers can choose from a front-wheel drive, all-wheel drive, or All Terrain model, each with its own electronic drive selector modes. The Normal, Sport, and Trailer/Tow modes are common to the trio. The FWD gets a Snow mode, the AWD adds adaptive 4x4 and Off Road modes; on the AWD, the 2x4 mode disconnects the rear axle from the drivetrain.

GM expanding Lansing Lambda CUV plant

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.