2002 Gmc Envoy Sle Sport Utility 4-door 4.2l on 2040-cars

Auto blog

GM to offer 2 years free maintance on most 2014 models

A day after Ford announced it was scaling back the complimentary maintenance program for its Lincoln brand, General Motors has gone in the completely opposite direction, offering most of its 2014 lineup with free maintenance. Since 2011, Cadillac models have all come with a four-year/50,000-mile complimentary maintenance program, but Chevrolet, Buick and GMC vehicles will now come standard with free maintenance for two years or 24,000 miles for the 2014 model year.
The program will give vehicle owners and lessees free oil changes, tire rotations and 27-point inspections following the recommended maintenance schedule laid out in each vehicle's owner's manual. We contacted GM to see which vehicles were eligible for the program, and a spokesperson got back to us with the following comment:
"All 2014 models are eligible, it's just that the included services vary by model, e.g., Spark EV would not need oil changes, Corvettes don't recommend tire rotations."

2014 GMC Sierra Regular Cab revealed

Despite initially launching in just the Crew Cab configuration, the lineup of 2014 GMC Sierra and 2014 Chevrolet Silverado trucks will eventually grow to include three cab sizes and three bed lengths. Oddly enough, our first look at the Regular Cab bodystyle has arrived in a General Motors press release discussing the aerodynamics of the new truck, with an image showing a Sierra Regular Cab testing in the wind tunnel. GMC's website says that Regular Cab and Double Cab models will be available by summer.
While it really didn't take too much imagination to figure out what the two-door version would look like, this Regular Cab Z71 looks pretty sharp with its standard-length (6.5-feet) bed - a longer bed will also be offered. In regards to the aero tuning of the 2014 Sierra, these images show just how far GM has gone in maximizing the truck's fuel efficiency and reducing its noise, vibration and harshness (NVH) levels. Interestingly, the press release shows visual evidence that keeping the tailgate up is best for aero - there's always been some Mythbusters-level contention about such things -but GM also says that adding tonneau covers (preferably soft) and running boards can also help improve the overall aerodynamics. Scroll down for all of this aero info in the official press release.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.