Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2015 Chevy Silverado, GMC Sierra heavy duty trucks unveiled

Proving just how important trucks are in the Lone Star State, General Motors has chosen the State Fair of Texas to reveal its new heavy-duty trucks from Chevrolet and GMC. Looking to take some of the wind out of the sails of the 2014 Ram HD and 2015 Ford F-Series Super Duty, the 2015 Chevy Silverado HD and 2015 GMC Sierra HD will have plenty to brag about when they go on sale in the first quarter of next year.
The bragging starts right up front with two available engines. The standard engine is a Vortec 6.0-liter V8 that produces 360 horsepower in the 2500HD and 322 hp in the 3500HD to go along with 380 pound-feet of torque in all applications. The true benefit of this powerplant is that buyers can opt for it to run on straight gasoline, E85 FlexFuel or even compressed natural gas (CNG). For maximum towing and even more flexibility, the 6.6-liter Duramax turbodiesel B20-capable V8 is the way to go, with its carryover 397 hp and 765 lb-ft of torque. Though the max towing abilities of 23,200 pounds (with a fifth-wheel trailer) are less than the 30,000-pound rating of the new Ram, the GM HD trucks offer better conventional trailer towing (19,600 pounds) and payload (7,374 pounds) than rival heavy-duty trucks...for now. The Duramax is paired with a six-speed Allison automatic transmission, while the gas engine gets GM's six-speed Hydra-Matic - no manual transmissions are offered.
Including the engines, GM continues to offer a broad range of configurations (more than 150, to be exact) including three cabs, two cargo bed lengths, numerous trim levels and, of course, the choice of single- or dual-rear wheels on the 3500. The HD trucks have faces that are similar to their half-ton counterparts, with the exception of a larger grille and bigger for improved air flow, and like the current HD offerings, the new Silverado HD and Sierra HD DRW models feature a one-piece bed design incorporating the fender extensions.

2015 Chevy Tahoe, Suburban and GMC Yukon unveiled

General Motors has today unveiled its new family of fullsize SUVs, including the 2015 Chevy Tahoe, its longer Suburban sibling, and their GMC Yukon, Yukon XL and Yukon Denali cousins. More efficient powertrains, improved aerodynamics, increased connectivity and better overall refinement are what Chevy and GMC say will separate their new SUVs from the current generation.
Sporting a tried-and-true body-on-frame architecture, these full-size SUVs feature platforms that are stronger and offer a wider rear track for "a more planted stance," according to Chevy and GMC. Mounted at the front of each SUV is an EcoTec3 powertrain, which consists of a standard 355-horsepower, 5.3-liter V8 (or a 420-hp, 6.2-liter V8 for the GMC Yukon Denali alone) with direct injection, cylinder deactivation and continuously variable valve timing, that's paired with a Hydra-Matic 6L80 six-speed automatic transmission. The setup is said to be more efficient than before, though official EPA fuel economies for each vehicle are not yet available. To help the powertrain achieve the best possible fuel economy in these 5,000+ pound SUVs, the new styling was developed with aerodynamics in mind. For the same reason, electric power steering also makes its debut in the Tahoe/Suburban/Yukon family.
The front fascias of the Chevy Suburban/Tahoe and GMC Yukon are distinct, but from the base of the A-pillars back, they share most of the same styling cues. This now includes inlaid doors that tuck into the door sills, instead of over them, which improves aerodynamics and fuel economy, and lessens interior noise. The hoods and liftgate panels now are made of aluminum in an effort to reduce vehicle weight. Chevy and GMC also tout that the Tahoe/Suburban and Yukon don't share a single piece of sheetmetal or lighting element with the brands' full-size pick-up trucks.