No Reserve 7 Passenger Heated Seats Backup Camera Bluetooth Carfax Certified Nr on 2040-cars

Auto blog

GM announces four new recalls, 507k vehicles affected

428,211 of these vehicles are located in the United States, 57,706 are in Canada, and 20,956 are in other markets. In its seemingly never-ending string of recalls, General Motors today announced four new campaigns covering some 506,873 vehicles. 428,211 of these vehicles are located in the United States, 57,706 are in Canada, and 20,956 are in other markets. First up is the 2013-14 Chevrolet Cruze, which is being recalled because "the inflator in the driver's front airbag may rupture and/or the airbag may not inflate during airbag deployment," according to GM. This could shoot metal pieces of the inflator into the cabin, injuring occupants during a crash. What's more, GM says that if the airbag does not inflate, this could, obviously, increase the risk of injury to the driver. A total of 29,019 Cruzes are affected in the United States, with an additional 4,066 units being recalled in Canada. The largest of the four recall campaigns involves four-wheel-drive versions of the 2014-15 Chevrolet Silverado and GMC Sierra, as well as the 2015 Chevy Tahoe, Suburban, GMC Yukon and Yukon XL. A grand total of 392,459 vehicles are affected in the US, with 53,607 more found in Canada, and an additional 20,874 in other markets. Here, the transfer case "may electronically switch to neutral without input from the driver," GM states. The automaker adds that if this occurs while the vehicle is moving, power will not be sent to the wheels. On top of that, if the vehicle is parked, it may roll away unexpectedly if the parking brake has not been set. In smaller recall news, 4,794 2013-14 Chevy Caprice police cars and SS sedans are being recalled in the US. According to GM, "If the motor gear teeth become stripped, the wipers may not operate" in these models. Lastly, 1,939 2014 Chevy Corvettes fitted with the FE1 or FE3 suspension are being recalled in the US "to repair a possible insufficient weld in the rear shocks that could lead to a fracture and/or reduce the shocks' service life." In Canada, 33 additional vehicles are affected, as are 82 more 'Vettes that were exported to other markets. General Motors is aware of one injury regarding the Cruze recall, and is not aware of any crashes or injuries in the other three recalls. Scroll down for the automaker's official release. GM Announces Four Vehicle Recalls DETROIT – General Motors (GM: NYSE) today announced four safety recalls covering 428,211 vehicles in the United States.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Chevrolet considering midsize crossover to slot between Traverse and Equinox

Crossovers are the new hotness, and automakers are looking to cash in by offering a size and shape for every customer. With Chevrolet's debut of the new 2018 Traverse in Detroit, which grew ever so slightly compared to the first-generation model, there is now a midsize-crossover-sized hole between the three-row Traverse and the compact Equinox. When asked about that obvious space, a Chevrolet spokesperson told us the company is looking into the possibility of expanding its crossover lineup. It should be a relatively simple thing to do, since all it would take is reskinning and rechristening the GMC Acadia with a bow tie, and we all know how much GM loves platform sharing. Although they're now different sizes, the new Acadia and Traverse still use the same platform; the Acadia is now on a short-wheelbase version of the C1XX while the Traverse uses long-wheelbase C1XX parts. A short-wheelbase Chevy built on the C1XX likely would be differentiated visually from both the Acadia and the larger Traverse. It may seem like flooding the lineup with more and more models would cannibalize sales of existing ones, but Chevrolet said it would rather have customers stay within the brand rather than going to another automaker. There have been whispers that some form of the Blazer name (possibly TrailBlazer) may make a return on a midsizer, but if it does don't expect an old-school body-on-frame SUV like the old one. In the end, if Chevy builds it, customers will come. Related Video: