2020 Gmc Acadia At4 on 2040-cars

Auto blog

GM recalling 8.4M cars, 8.2M related to ignition problems

General Motors today announced a truly massive recall covering some 8.4 million vehicles in North America. Most significantly, 8.2 million examples of the affected vehicles are being called back due to "unintended ignition key rotation," though GM spokesperson Alan Adler tells Autoblog that this issue is not like the infamous Chevy Cobalt ignition switch fiasco.
For the sake of perspective, translated to US population, this total recall figure would equal a car for each resident of New Hampshire, Rhode Island, Montana, Delaware, South Dakota, Alaska, North Dakota, the District of Columbia, Vermont and Wyoming. Combined. Here's how it all breaks down:
7,610,862 vehicles in North America being recalled for unintended ignition key rotation. 6,805,679 are in the United States.

2015 GMC Canyon is a Chevy Colorado in Sierra clothing [w/video]

Ford may not offer the Ranger in America anymore, nor Dodge (or Ram) its Dakota. But General Motors - not unlike Toyota with its Tacoma and Nissan with the Frontier - isn't about to give up on the midsize pickup market. Less than two months ago, it revealed the new Chevrolet Colorado, and now it's following up with its mechanical twin, the 2015 GMC Canyon.
Launched today ahead of its reveal at the Detroit Auto Show, the Canyon slots into the GMC lineup (and differentiates itself from its Chevrolet twin) with styling that closely apes the larger GMC Sierra 1500 and Sierra HD, only a size or two smaller. Oh, there are visual differences, like a subtly different grille treatment and lower fascia, but it still maintains its big brother's square-jawed good looks and rectilinear flared fenders.
Two aluminum-block engines with direct injection and variable valve timing are available: a 2.5-liter inline-four comes standard with 193 horsepower and 184 pound-feet of torque, and a 3.6-liter V6 is available with 302 hp and 270 lb-ft. Buyers will also be able to choose between three bodystyle configurations, three trim levels and either two- or four-wheel drive. A six-speed automatic transmits the power to the road, but a six-speed manual is available on the base model with the 2.5 and 2WD, and there's an All Terrain package available on SLE models. A diesel is expected later.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.