2012 Denali Used 3.6l V6 24v Automatic Fwd Suv Premium Onstar Bose on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

2022 GMC Hummer Edition 1 weighs 9,063 pounds

From the beginning, the Hummer line of vehicles has been synonymous with the phrase, "absolute unit." The M998 Humvee turned to civilian use as the Hummer H1 came with a curb weight of 7,560 pounds depending on configuration. The much more urbane Hummer H2 didn't sacrifice much of those gains, putting about 6,615 on the scales. Let us not forget that the behemoth gravitational pull and square-jawed mass were what every Hummer buyer wanted. So, starting with the brand values and customer demand, and adding the fact that electric vehicles are substantially heavier than their ICE counterparts, no one should be surprised that the 2022 GMC Hummer Edition 1 weighs 9,063 pounds. That's just one of the substantial figures GMC included in a self-certification filing submitted to the U.S. Environmental Protection Agency, the document rooted out by Car and Driver. Last year GMC told us the Hummer would weigh 9,046 pounds, which proves again the Freshman 15 (or 16) is unavoidable.  Loaded up with humans and their accessories, the truck's gross vehicle weight rating (GVWR) comes in at 10,550 pounds. It takes a few other big numbers to keep that kind of tonnage on the go. The Ultium battery weighs 2,923 pounds. With a 617-amp-hour capacity at 400 volts, total capacity comes in at 246.8 kWh, specific energy at 158 Wh/kg. Usable capacity is about 85% less, at 212.7 kWh. For the time being, these numbers put every other pack in a production vehicle in the shade. That gargantuan chemical plant in the Hummer's floor powers a 329-mile range the same way a giant fuel tanks feed a truck that gets 8 miles to the gallon. The miles per gallon equivalent figures GMC submitted to the EPA are 51 MPGe city, 43 MPGe highway, 47 MPGe combined. Motor Trend questioned whether GM applied the correction factor used for window sticker numbers; if not, the standard 0.7 correction drops the MPGe specs to 36 city, 30 highway, and 33 combined. However, trucks with a GVWR beyond 8,500 pounds don't need to display fuel economy figures on their window stickers, so don't expect to see any such details on dealer lots. For comparison, the Rivian R1T Launch Edition weighs about 7,000 pounds, and fits a 128.9 kWh battery good for an estimated 314 miles estimated at 70 MPGe.

2019 GMC Sierra CarbonPro Edition pricing starts above $65,000

GMC is hard at work building carbon fiber beds for its CarbonPro trucks, so it's fitting that the company has finally released pricing for the 2019 GMC Sierra CarbonPro Edition. It's not cheap by any measure. The most "affordable" for 2019 is the AT4 version starting at $66,635. It's also available in Denali trim, and that version starts at $70,020. Both represent an increase of $8,000 to $9,000 more over the base AT4 and Denali models. That may seem like a lot to go from a steel bed to a carbon fiber one, but you're getting more than the bed for that money. GMC also includes unique badging, a Bluetooth bed speaker, rear-camera mirror, surround vision cameras, automatic emergency braking, lane-keep assist, automatic headlights, power side steps, a sunroof, trailer tire pressure monitoring and a color heads-up display to both models. The AT4 specifically gets a Bose sound system, navigation, parking sensors and a cat-back exhaust, too. The Denali adds unique 22-inch wheels. Both only come with the 6.2-liter V8 and 10-speed automatic. To equip a regular GMC Sierra AT4 similarly to the CarbonPro Edition, the price comes out to $64,110. The Denali comparably equipped to the CarbonPro is $67,940. So the bed itself is about $2,000 to $3,000. The 2019 GMC Sierra CarbonPro Edition trucks should be reaching dealers very soon. They will soon be supplanted by the 2020 version, which will add the new 3.0-liter diesel inline-six as an engine option. The AT4 CarbonPro will get some extra black accents for 2020, too.