2011 Gmc Acadia Slt 7-pass Htd Leather Nav Rear Cam 29k Texas Direct Auto on 2040-cars

Auto blog

2017 GMC Acadia adds four-cylinder and All Terrain model

General Motors has officially started the process of updating its long-in-the-tooth fullsize CUVs by unveiling the second-generation GMC Acadia at the 2016 Detroit Auto Show. While the Acadia is 700 pounds lighter, it's also shorter and narrower, which means it's not quite the people mover it used to be. You'll no longer be able to haul eight passengers, although there will still be five-, six-, and seven-passenger offerings. While families might not be thrilled with the loss of a seat, the lighter weight is a net win. Not only will the V6 model feel more powerful and efficient – in addition to the lower curb weight, there's a new, 310-horsepower engine – but it will also likely be more economical. GM estimates the front-drive V6 will return 25 miles per gallon on the freeway, compared to 24 mpg for the current front driver, but city fuel economy remains pegged at 17 mpg. In a move we're not entirely sold on, though, the Acadia will also adopt a four-cylinder engine, and no, it's not GM's highly regarded 2.0-liter turbo. Instead, you'll be able to order this 4,000-pound CUV with a 2.5-liter, 194-horsepower four-cylinder. What it won't be able to provide in straight-line speed, it will make up for with fuel economy. GM is wagering the front-drive, four-cylinder Acadia will net 22 mpg in the city and 28 on the highway. Both engines are paired with a HydraMatic 6T75 six-speed automatic. A new All Terrain model is said to be optimized for wet, snowy and icy conditions, and its drive mode selector removes the Off Road selection in favor of All Terrain. We have live images of both the new Acadia Denali, as well as the new-for-2017 All Terrain model, direct from the floor of the 2016 Detroit Auto Show. There's also a video of the full GMC press conference with reactions from our editors. Check them out. GMC Introduces All-New 2017 Acadia * 700-lb. lighter, more efficient crossover aimed at heart of midsize segment * Expanded range of available active safety features, including Front Pedestrian Braking and Surround Vision Camera * New powertrains include a 2.5L I-4, offering a GM-est. 28 mpg hwy, and an available est. 310-hp 3.6L V-6 * Acadia Denali with new, exclusive Continuously Variable Ride Control * New Acadia All Terrain with an advanced AWD system with Active Twin Clutch * On sale this spring DETROIT, Tuesday, Jan.

GM tells 2021 Chevy Express and GMC Savana owners to park vans outside due to fire risk

GM is telling owners of certain 2021 Chevrolet Express and 2021 GMC Savana work vans to park them outside and away from other vehicles and structures due to a fire risk. Additionally, the company is recalling 10,154 of the vans it believes to be at risk of catching fire. The breakout is 7,891 for Chevy and 2,223 for GMC.  Only vehicles equipped with the 6.6-liter V8 (the new-for-2021 engine option) are included in the recall, and it’s limited to vans produced on or prior to December 7, 2020. The problem stems from some anti-rotation tabs on the positive battery terminal that are too close to a fuse block assembly attachment post. This lack of clearance could cause the tabs to come into contact with the fuse block, causing a short circuit. GM points out that a short-circuit of this nature could cause battery drain or lead to a fire under the hood. Your warning for the time being will come in the form of a low battery voltage warning, or you might just wake up with an unexpected dead battery. GM says that it first opened an investigation into this problem on January 26 this year after it was notified of an underhood battery fire on a 2021 Express. The investigation found three other underhood fires and concluded that these fires were originating from the positive battery cable attachment near the fuse. This recall was officially posted on March 11 this year, and the National Highway Traffic Safety Administration just sent a notification out to the media yesterday. The fix is a relatively simple one. Dealers are going to remove a portion of the anti-rotation tab on both positive battery cable terminals near the fuse block assembly attachments. This increases the clearance and eliminates the risk of fire, GM says. The job will be done under warranty, and GM says it will begin contacting owners for recall work on May 3 this year. Recalls Chevrolet GMC Safety Minivan/Van Commercial Vehicles

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.