2001 Ford Windstar Se Sport Mini Passenger Van 4-door 3.8l on 2040-cars

Auto blog

Ford Police Interceptors win acceleration war against Dodge, Chevy

Just last month, Ford announced its first-ever non-pursuit-rated version of the Police Interceptor sedan for agencies looking to maximize fuel economy, but that doesn't mean that Ford is giving up on chasing down the bad guys. While the Dodge Charger can lay claim to the fastest lap time at the Grattan Raceway test facility held by the Michigan State Police, the results are now in for the Police Vehicle Evaluation acceleration tests. And Ford's Police Interceptor duo (sedan and utility) came out on top.
In the acceleration tests, Ford says that the Taurus-based PI Sedan with the newly available 3.5-liter EcoBoost V6 was the quickest among prospective police cars in both 0-60 and 0-100 mile per hour times. The sedan posted a 0-60 time of 5.66 seconds with all-wheel drive and 5.71 seconds with front-wheel drive, besting V8-powered competitors like the Chevy Caprice and Dodge Charger by more than 0.3 seconds. These rivals close the gap on the AWD sedan in the 0-100 test with the Ford taking 13.5 seconds compared to the Chevy's time of 14.35 and the Dodge's time of 14.7.
As for utility vehicles, the Explorer-based PI Utility, which accounts for 60 percent of Ford's police vehicle sales, essentially went head-to-head with the V8-powered Chevy Tahoe with similar results. Equipped with the new EcoBoost engine option, this big SUV hit 60 mph in just 6.28 seconds and 100 mph in 15.51 seconds compared to times of 8.22 seconds and 21.95 seconds, respectively, for the Tahoe. Other important tests in the PVE include braking and top speed, but while no automakers have stepped up to boast about their numbers in either of these categories, Ford's images show that the V8 Caprice had the highest top speed of the cars at 155 mph while the Tahoe's 139-mph speed made it the fastest utility vehicle.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.

2017-19 Ford Super Duty trucks recalled for tailgates that could open

Ford announced two separate recalls today, though neither has resulted in any known injuries. The first recall, which deals with a tailgate malfunction, affects 261,617 examples of 2017-2019 F-250, F-350, and F-450 Super Duty pickups. The second, which anticipates the possibility of a fuel leak, affects 3,893 units of 2020 Explorer and 2020 Lincoln Aviator SUVs with 3.0-liter engines. Ford says tailgates might accidentally open on some 2017-2019 Super Duty trucks because of a short circuit. If the pickups have an electric tailgate latch-release switch on the tailgate handle, water might get into the wiring. If the water hits the right spots, a short circuit could cause the switch to release the tailgate latch. In a worst-case scenario where the tailgate opens while driving, contents of the truck's bed could fall out and create a safety hazard. Dealerships will fix the problem by modifying the tailgate frame wiring harnesses with jumper pigtails and install a new tailgate handle release switch. Of the lot, 231,664 trucks are in the U.S., and 29,953 are in Canada. The Ford recall number is 19S48.  The second recall is much smaller, involving fewer than 4,000 vehicles. In certain 2020 Explorers and Aviators with 3.0-liter engines, Ford says, "The convolute protective sleeve on the liquid fuel line is not long enough, which may allow for potential hard contact with the convolute-protected vapor fuel line. Over time, with vibration and engine roll, hard contact between the two fuel lines could cause the convolute on the vapor fuel line to rub through the plastic liquid fuel line." If that happens, it could be a fire risk and hazardous for drivers and passengers. Only 35 of those SUVs are in Canada, and the rest are in the United States. Dealers will fix the problem by replacing the defective convolute with a full-length piece and tying it down with a strap. The recall reference number for the Aviators and Explorers is 19S49. The recall adds to what has otherwise been a rocky early production phase for the new Explorers and Aviators.