2010 Xl Used 2l I4 16v Fwd on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost loses big power on 87 octane

The 2015 Ford Mustang with the 2.3-liter EcoBoost four-cylinder is a pretty potent package on paper. With 310 horsepower and 320 pound-feet of torque, it boasts better performance numbers than the 3.7-liter V6, but with better fuel economy as an added benefit. However, if you're in the market for one of these boosted 'Stangs, you should probably keep in mind that it really prefers to gulp premium, 93-octane fuel. It can drink 87-octane swill in a pinch, but you're going to find significantly less power underfoot when pulling away. While it's not shocking that the ponies are dialed back with a lower grade of gasoline, an alleged page from a Ford training manual obtained by Mustang 6G purports to show just how much power is lost, though. According to this document, the 2.3-liter EcoBoost makes 275 horsepower and 300 pound-feet of torque when running on lower octane fuel. That's a substantial reduction of about 11.3 percent compared to when the engine drinks 93 octane. Interestingly, according to Mustang 6G, that finding was a bit better than expected, because a Ford engineer reportedly said power would be down about 13 percent without altering peak torque. In speaking with Autoblog, Paul Seredynski of Ford powertrain communications, objected to part of this document. While he couldn't confirm the specific losses listed for the Mustang EcoBoost, "torque remains unchanged" with lower octane gasoline, Seredynski said. He speculated this training manual page was "possibly from before the engine was certified" and therefore showed incorrect figures. Serendynski did confirm that the automaker recommends using 93 octane, and like all modern engines, the software adapts if it's lower. "Peak power would be reduced" by using a lesser grade, he confirmed. Featured Gallery 2015 Ford Mustang EcoBoost: First Ride View 20 Photos News Source: Mustang 6GImage Credit: Copyright 2015 AOL, Ford, Mustang 6G Ford Technology Convertible Coupe Performance ecoboost ford mustang ecoboost

Ford C-Max Solar Energi takes a recharging station wherever it goes

Companies ranging in size from small startups to major automakers have been experimenting with solar-powered charging stations for EVs and plug-in hybrids. And, of course, people have been powering vehicles with onboard solar panels for quite some time, too. Still, Ford's new C-Max Solar Energi Concept shows the promise of a truly practical implementation of solar on a production vehicle, and it may not be as far off in the future as we had thought.
As we reported a few days ago, the Solar concept makes use of a "concentrator lens" that focuses sunlight onto the Ford's roof-mounted solar panels. The special lens follows the rays of the sun to maximize the amount of charge being fed to the batteries of the car, taking about a day to fully charge the 21-mile, all-electric range of the C-Max Energi. Ford data suggests that combination might be enough to power 75 percent of all trips made by a statistically average driver. In turn, using the sun to power a vehicle could reduce yearly C02 emissions by up to four metric tons when compared with the driver of an average gasoline-powered sedan.
We've got live images of the C-Max Solar Energi Concept, jauntily tilted on its display to best present it's signature solar panels, straight from the CES floor.

Experts wonder if aluminum F-150 gives Ford a real advantage

There's no doubt that Ford is taking a risk in producing the body of its upcoming new F-150 pickup truck in aluminum. What is up for debate, however, is whether aluminum was a wise risk to take in the first place. Wards Auto took the opportunity to poll some experts on the subject of aluminum versus steel in the automotive sector, with somewhat unsurprising results.
Richard Schultz, a project consultant at Ducker Worldwide, which bills itself as "a leading aluminum industry consultant (though they also deal in steels), suggests that the potential drawbacks to aluminum - higher costs, lower supply - aren't really impediments to the auto industry's increased acceptance of the lightweight metal.
Similarly, Randall Scheps, global automotive marketing director for Alcoa, a massive aluminum producer, counters claims that aluminum is less safe for vehicle occupants, suggesting that the use of aluminum can actually increase safety as it could potentially allow for larger vehicles with more crush space than steel.