1970 Torino Cobra Drag Pack on 2040-cars

Auto blog

2016 Ford Taurus to ride atop reworked Fusion platform

Generally, cars get bigger and heavier as they get older. That's why it looks so ridiculous when you park a classic Mini next to a modern version. The same can be said of the Corvette, the BMW 3 Series, Porsche 911 and, of course, the Ford Taurus. In the Taurus' case, though, that size has become a liability, particularly because the big brute isn't nearly as sizable on the inside as it is on the out.
For 2016, Ford is aiming to rectify that. According to Edmunds, the 2016 Taurus will ride on a stretched and widened Ford Fusion platform. Ford is expecting this move to go a long way in trimming the Taurus' ample body fat.
"The problem with today's Taurus is that it is overweight and even the high performance SHO is not really competitive," said a source that spoke to Edmunds on condition of anonymity. The 365-horsepower SHO variant, "actually weighs about as much as the stretched Audi A8 L. Of course, Audi uses an extensive amount of aluminum, but it is a much bigger car."

Ford to spread all-wheel drive across performance range

Car and Driver took a closer look at the all-wheel-drive system in the Focus RS, Ford reps having made "broad hints" about it being applied to other performance vehicles. One spokesperson even said that he "can see this as one of those technologies of the future." That would make sense because, as C/D notes, it couldn't have been an inexpensive job to engineer the torque-vectoring unit for the Focus – one that can send 70 percent of torque to the rear wheels, and send 100 percent of that portion to either wheel if needed. C/D also clues into the system's close similarity to the AWD unit in the recently updated Range Rover Evoque, which is manufactured by Sweden's GKN Driveline. In the Evoque, torque vectoring is brake based and two electronically controlled clutches turn the Range into a front-wheel-drive crossover under 22 miles per hour. Ford wouldn't comment on the GKN Driveline connection, or even if there is one. No matter where it might come from, more performance Fords are good for every enthusiast, and we do not look an AWD, torque-vectoring gift horse in the mouth. Featured Gallery 2016 Ford Focus RS News Source: Car and Driver Ford Technology Hatchback Performance

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.