Pre-owned 2013 Taurus Sel Fwd, Bluetooth, Sync, Sunroof, 12705 Miles on 2040-cars

Auto blog

Ford shutters Genk assembly plant in Belgium

Ford has become the latest automaker to close one of its European assembly plants. The facility in question is located in the Belgian city of Genk and has been in operation since the early '60s when it started building the Taunus, Ford's first mass-produced, front-drive model. As part of the plan first announced over two years ago, the Genk Body & Assembly Plant is now closing its doors after half a century in the business and over fourteen million vehicles built. Although the plant itself employed some 5,000 workers, once you take into account the suppliers built up around the plant, the overall impact on employment in the area edges closer to 12,000. Genk Body & Assembly had until recently been tasked with producing the Mondeo sedan (which in its current iteration we know as the Fusion) as well as the S-Max and Galaxy minivans. Production of the Mondeo shifted in 2013 to the company's plant in Valencia, Spain, which also handles the Kuga crossover and Transit Connect cargo van, and will soon take over the minivans from Genk as well. The move follows a similar decision undertaken by General Motors to close the Opelwerk plant in Bochum, Germany. It also reflects a scaling down of automobile production in Belgium specifically: although Audi still manufacturers in Brussels and and Volvo in Ghent, Opel closed its plant in Antwerp in 2000 and Renault ceased production in Vilvoorde back in '97. However Ford still maintains its famous proving ground half an hour to the north in Lommel, Belgium. News Source: AutovisieImage Credit: Kristof Van Accom / AFP / Getty Plants/Manufacturing Ford plant ford s-max ford galaxy

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.

2013 Ford C-Max Hybrid recalled over lack of roof padding

Ford is recalling 33,021 units of its 2013 C-Max Hybrid not equipped with optional panoramic roof panels. During testing, the model in question returned testing results for occupant head injuries that fell outside of criteria laid out in the Federal Motor Vehicle Safety Standard. The issue puts occupants at greater risk of injury in the event of a crash if they are in an affected car.
The recall will begin August 19, at which time C-Max Hybrid owners can take their cars to dealers to have energy-absorbent material installed between the headliner and roof. The bulletin below from the National Highway Traffic Safety Administration has more information.